HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
First Cloudbuster - Aegis
Goto page 1, 2  Next
 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite and Crystal Photos !
View previous topic :: View next topic  
Author Message
028956blh
Member


Joined: 03 Mar 2014
Posts: 360
Location: United States

PostPosted: Mon May 25, 2015 5:20 am    Post subject: First Cloudbuster - Aegis Reply with quote

Over the last two weekends I had the honor of helping two dear friends build a cloud buster. They and I have never built one or seen one firsthand. It was an amazing experience. Enjoy the pictures! Suggestions and comments are welcomed.



1" diameter copper pipes.


1-1/2" diameter heat shrink material for insulating the bottom pipes. Thanks Starseed.


The gas grill worked great for heating the heat shrink. Nice even heat.




One person worked the grill, the other used the torch.


We wet soldered the copper caps onto the bottom pipes.


The heat shrink material almost closes completely. We sealed the last bit with silicone caulk.








My friend had Dumortierite she had mined that she wanted in the top layer.


Large Brazilian Quartz STs near the bottom of the pipes with Blue Kyanite. Selenite blades were laid in during the pour. We alternated the ST direction so that 3 point up, 3 point down.


The first layer is clear resin only - no metal, no crystals. 1-1/2 inch thick so that the bottom of the pipes are at least one inch from the bottom of the mold. Thanks again Starseed.





Those are large chunks of Black Tourmaline between the pipes, a large ST quartz in the middle pointing up, and Selenite.








Thick vinyl tubing, reinforced with nylon mesh, separates the bottom pipes from the upper pipes, with a little help from hose clamps.










5 foot long copper grounding rod pounded into the ground.






18 inch lower pipes, 5 foot long upper pipes. Deployed, grounded, working!


We're going to start pouring TBs next weekend so that they can start gifting the neighborhood around them, bust the nearest cell phone towers, and then start expanding the grid outward.
Back to top
View user's profile Send private message
Kieron
Member


Joined: 28 Apr 2014
Posts: 582
Location: Nowhere Man

PostPosted: Mon May 25, 2015 12:21 pm    Post subject: Reply with quote

Fascinating process. The black bucket is set into a water bath, due to the catalyzing heat being generated, I presume? I bet it was tough to remove the CB resin base from the black bucket once cured. It looks heavy.

Your dedication continues to impress me. Smile
Back to top
View user's profile Send private message
028956blh
Member


Joined: 03 Mar 2014
Posts: 360
Location: United States

PostPosted: Mon May 25, 2015 2:13 pm    Post subject: Reply with quote

Thank you Kieron. Yes, water bath to control temperature. The base is surprisingly light. Even though resin is heavy, the lightweight aluminum keeps the weight down. Had to cut the plastic bucket away from the orgonite base.

Brett
Back to top
View user's profile Send private message
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Mon May 25, 2015 6:01 pm    Post subject: Reply with quote

Nice report.

i was looking forward to see your work.

welcome to CB operators club. so to speak.

Smile

Kudos to you guys.

the bucket of water is a neat trick.

to me, pouring a cb feels like getting on a rocket to Mars or jupiter...

Epic feeling.

everytime, i re-discover what life feels like.

is that CB in Cali?

over the last weeks, i looked at satellite maps of Cali with an increased interest. there was an obvious change in dynamics.

if i was to guest, id say the CB is located in the greater SF area...

but then again, guessing that kind of stuff is nearly impossible. still it is a great brain exercise...

thanks for your work.

Earth and her passengers need it.

Salut

Virgil
_________________
"Let the future tell the truth, and evaluate each one according to his work and accomplishments. The present is theirs: the future, for which i have really worked, is mine. - Nikola Tesla
Back to top
View user's profile Send private message
028956blh
Member


Joined: 03 Mar 2014
Posts: 360
Location: United States

PostPosted: Tue May 26, 2015 1:35 am    Post subject: Reply with quote

Virgil, this cloud buster is in San Diego California, where I live. I will be building mine next. I have already been gifting my local area around my home and busting cell phone towers over the past several months to lay the base. yes, building this cloudbuster was exhilarating to say the least. I felt very connected to a large strong powerful force and it felt good. It feels good. thanks for the excellent information you provide here.

Brett
Back to top
View user's profile Send private message
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Tue May 26, 2015 12:13 pm    Post subject: Reply with quote

he he. San Diego.

i was very wrong.

now that you say it, it makes sense.

You guys are mostly in the Desert. very interesting.

Good day!

Salut

Virgil
_________________
"Let the future tell the truth, and evaluate each one according to his work and accomplishments. The present is theirs: the future, for which i have really worked, is mine. - Nikola Tesla
Back to top
View user's profile Send private message
bluebark67
Member


Joined: 17 Mar 2015
Posts: 94
Location: NJ, USA

PostPosted: Sat May 30, 2015 12:10 pm    Post subject: Reply with quote

Bret nice work on the Aegis. I didn't realize that the pipe needed to be insulated from the orgonite. Can't wait to hear the results of your work over the next few months..

BB
_________________
"It is by will alone I set my mind in motion." - Old Mentat saying.
Back to top
View user's profile Send private message
028956blh
Member


Joined: 03 Mar 2014
Posts: 360
Location: United States

PostPosted: Sat May 30, 2015 3:55 pm    Post subject: Reply with quote

bluebark67 wrote:
Bret nice work on the Aegis. I didn't realize that the pipe needed to be insulated from the orgonite. Can't wait to hear the results of your work over the next few months..

BB


Hi BB.

If you haven't seen it, Starseed has an excellent thread at this forum explaining the Aegis (induction) CB construction, including how to convert an original Don Croft style iCB (induction CB). I misinterpreted his instructions when we built this particular Aegis CB and did something that didn't need to be done. We didn't need to separate the upper and lower pipes with vinyl, or use the induction wires, since we used heat shrink on the lower pipes.

The induction wires are needed when you convert the Croft style to an iCB because in order for induction to work in moving the energy through the CB, you need to insulate the copper pipes from the orgonite base. Since the Croft CB has the pipes cast directly into the base (not insulated from the orgonite), the insulation is accomplished by separating the upper pipes from the lower ones (typically using vinyl or rubber) and by using the induction wires.

When you make an iCB from scratch and insulate the lower pipes from the orgonite (like we did with the heat shrink), then there is no need to separate the upper and lower pipes from each other, (they can be connected with copper couplings) or to use the induction wires. Orgone energy is inducted from the copper pipes through the heat shrink insulation to the orgonite base, and visa versa.

I hope this helps. I'm still learning more about how induction works in general. Starseed or others, please feel free to chime in.

Brett
Back to top
View user's profile Send private message
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Sun May 31, 2015 9:43 am    Post subject: Reply with quote

well, i got nothing to ad.

you got it covered.

Smile

Salut

Virgil
_________________
"Let the future tell the truth, and evaluate each one according to his work and accomplishments. The present is theirs: the future, for which i have really worked, is mine. - Nikola Tesla
Back to top
View user's profile Send private message
bluebark67
Member


Joined: 17 Mar 2015
Posts: 94
Location: NJ, USA

PostPosted: Sun May 31, 2015 1:21 pm    Post subject: Reply with quote

I see...you mean Virgil's 1000 page thread on the Aegis? Got to page 3 the other day...lol. For some reason, I fell the bottom pipes should be in direct contact with the orgonite to produce a stronger induction field.

But i did not study electrical eng. in school...so will leave it up to those in the know~~

BB
_________________
"It is by will alone I set my mind in motion." - Old Mentat saying.
Back to top
View user's profile Send private message
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Sun May 31, 2015 2:39 pm    Post subject: Reply with quote

in terms of electrical tech, there is a difference to be made between the term direct contact and close proximity.

"direct contact" refers to conductive contact, as to electricty can travel with out much resistancy.

most electric transformers and power supply operate on the induction principle.

close proximity but no "direct contact" is optimal for induction.

i now see a icb as a orgone transformer/por supply.

Wink

Salut

Virgil
_________________
"Let the future tell the truth, and evaluate each one according to his work and accomplishments. The present is theirs: the future, for which i have really worked, is mine. - Nikola Tesla
Back to top
View user's profile Send private message
028956blh
Member


Joined: 03 Mar 2014
Posts: 360
Location: United States

PostPosted: Tue Jun 02, 2015 2:20 pm    Post subject: Reply with quote

First report:
Vinyl couplers were replaced with copper ones and induction wires were removed from the pipes. Yesterday, a few miles from the iCB, this is what my friend saw. Light faint line at the top is an almost blurred out chemtrail and bottom half looks like a dragon sylph:




This next picture is of the sky directly over the CB. Plane is trying to lay down a chemtrail, unsuccessfully! Very Happy At the left is the jet, moving from right upper corner to left lower corner in the picture. Chemtrail behind the aircraft is being immediately broken up.



The CB IMMEDIATELY erased a chemtrail in the process of being made right over their house, maybe 3+ miles around each direction of the property within less than a minute, making the sky perfectly blue again, no clouds whatsoever. This happened about 15 minutes after removing the induction wires and connecting the copper couplers.

After the copper couplers were installed, a growling/quacking sound like a duck was heard about 3-4 times. The pipes are physically shaking. I remember reading somewhere here (maybe Starseed's Aegis CB thread) that the pipes physically vibrate once the CB has been up and running. They resonate as orgone energy is being moved. I also recall reading that resonation is greatest at around midnight when the sun is farthest away from our location and the cosmic wave energy hitting us is at the highest level.

Brett
Back to top
View user's profile Send private message
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Tue Jun 02, 2015 3:22 pm    Post subject: Reply with quote

wow, great report.

the deep earthing rod you use might have something to do with the sounds you heard from the cb.

not many have heard the sound of a cb...

and your sky look like mine.

next, the cb will attempt to restore the healthy cycles of the atmosphere.

it create a pattern in the weather.

on a week basis, moisture in the air can go from 30 % to 100%, back and forth couples times a month, i see that as a sinus cycle, in terms of statistics, quite healthy. the moon seems to trigger the whole process to.

anyway this is what i experience here.

depending where you sit in the atmospheric cells or ferrel cells, that sinusoidal cycle will vary.

but at least it feels and looks more natural.

do you notice a stronger ozone smell outside?

Smile

Salut

Virgil
_________________
"Let the future tell the truth, and evaluate each one according to his work and accomplishments. The present is theirs: the future, for which i have really worked, is mine. - Nikola Tesla
Back to top
View user's profile Send private message
GreenGoldEye
Member


Joined: 24 Apr 2014
Posts: 789
Location: Texas

PostPosted: Tue Jun 02, 2015 8:00 pm    Post subject: Reply with quote

I find this thread really, really interesting. I may have to try making one of my own this summer. I think I am ready for it... and goodness knows here in DFW, we could use it.
_________________
http://shannonwendtlandau.wix.com/a-quarrel-called
Back to top
View user's profile Send private message
028956blh
Member


Joined: 03 Mar 2014
Posts: 360
Location: United States

PostPosted: Wed Jun 03, 2015 4:10 am    Post subject: Reply with quote

starseed wrote:
wow, great report.

the deep earthing rod you use might have something to do with the sounds you heard from the cb.

not many have heard the sound of a cb...

and your sky look like mine.

next, the cb will attempt to restore the healthy cycles of the atmosphere.

it create a pattern in the weather.

on a week basis, moisture in the air can go from 30 % to 100%, back and forth couples times a month, i see that as a sinus cycle, in terms of statistics, quite healthy. the moon seems to trigger the whole process to.

anyway this is what i experience here.

depending where you sit in the atmospheric cells or ferrel cells, that sinusoidal cycle will vary.

but at least it feels and looks more natural.

do you notice a stronger ozone smell outside?

Smile

Salut

Virgil


Virgil,
Yes, the CB owner reports smelling ozone. Also, a family member smelled gas in the neighborhood as she was driving home last night.

Here is the CB with copper couplings. Vinyl couplings are still on because they look pretty cool!







I've been reading a book about antennas. It says that a rocky, clay soil (like we have here in San Diego) is not good for grounding a radio antenna. It can be improved by installing a rock salt trench around the grounding rod and watering it, or by sinking salt pipes around the grounding rod. Now this applies to a radio communications system. In your opinion, do you think enhancing the ground with rock salt like this would significantly improve the CB operation? The downside to using salt is that it kills the grass.

Brett
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite and Crystal Photos ! All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum