HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
Connecting a CB to a battery, or ADDING power...
Goto page 1, 2  Next
 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Questions and Answers
View previous topic :: View next topic  
Author Message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Mon Feb 13, 2017 6:47 pm    Post subject: Connecting a CB to a battery, or ADDING power... Reply with quote

I have a couple of questions about powered orgonite. It is time to start planning the powered Aegis cb I want to build this summer.

I am reposting the pic of my cloudbuster attached to a digital oscilloscope measuring 17.5 volts of electrical generation, simply from the piezoelectric effect i presume.

<a> photo IMG_20170208_120427_550_zpsyxyztffa.jpg</a>



17.5 volts is a significant amount of electricity. What happens if I connect the copper pipes on the cb to a battery- if I attach a load to the cb will all the electrons just disappear, affecting the cb's performance detrimentally, or is it 17.5 volts of constant electricity? I think RMS or average voltage was 6.5. If it isn't constant voltage n i attach a load to copper pipes, how long will it take for the cb to generate more electricity until it gets back up to full power?

Conversely, what happens if I ADD power to the cb? Like, A LOT of power- at least 110 volts to a properly grounded cb. Does it make it a lot more powerful? So long as it's grounded it can't explode, right? Anybody ever heard of somebody connecting a grounded cb to 110 volts, or more?

What are the proper steps to begin learning to do this? I figure I'll buy a zapper n make myself a nice powered charging plate like Sttoy illustrated beautifully in his recent post, so by October I can pour a grounded powered Aegis. That's my goal. People who don't set goals grow old without attainment.

In video below this guy my new personal hero Gerald Morin produces 400,000 regular volts using a hobbyist setup with 2 small 18 volt batteries, a tiny motor connected to a generator connected to an iphone-sized transformer connected to another small 'step-up transformer'. Then he fiddles with a few connections n changes it from regular volts to Tesla radiant volts, which never burn out light bulbs and is completely safe to touch as Gerald Morin demonstrates touching the output of a 400,000 volt radiant lead, which is the part that impressed the hell out of my brother the electrical expert who I'm tryn2get2help me build one of these things.

https://m.youtube.com/watch?v=XOq9C3YSjKg


Last edited by Johnnyusa on Tue Feb 21, 2017 10:35 pm; edited 1 time in total
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Mon Feb 20, 2017 3:53 am    Post subject: Reply with quote

I know we are supposed to build it first THEN talk about, but building a cb requires planning n its expensive so any educated guesses would be appreciated. The way I see it there's 2 basic strategies to power a cb:

1) build a regular cb w/ a sp in it from OC using thd regulated power supply connected to 110 volt wall outlet. How come nobody ever posts pics of their cb w/ an sp in it connected to 110 volts? Do sp-powered CBs perform well enough to justify the expense of building one- anybody?

2) get a giant double-terminated lemurian quartz crystal for the cb's heart, connect a copper wire around one crystal point that's connected to the copper pipes, & the other side of the DT crystal grounded into a buried 8 ft copper lightening rod. Connect speaker wire to the 110 volts wall plug- yea ok im not sure how to wire that connection from speaker wire to the wall yet but my brother the electrician will help me or i know a couple other mad scientist types I can ask that will knock that out for me in five minutes if nobody here has any ideas.

Thats why it's NICE TO HAVE A FORUM like this WHERE U CAN ASK QUESTIONS even if they're dumb sometimes thanks everybody love u guys


Last edited by Johnnyusa on Tue Feb 28, 2017 11:31 pm; edited 1 time in total
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6660
Location: Here Now. Somewhere Else Later

PostPosted: Mon Feb 20, 2017 8:49 am    Post subject: Reply with quote







My only work with powered CBs.

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Tue Feb 21, 2017 1:01 am    Post subject: Reply with quote

Post under construction while I google why n how creating voltage inevitably creates RF emission... check back shortly...
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6660
Location: Here Now. Somewhere Else Later

PostPosted: Tue Feb 21, 2017 1:33 am    Post subject: Reply with quote

Johnnyusa wrote:
On the first pic, does the powered lead from the spacers plug into the regulated 110 volts A/C power supply you sell on OCTOBER?

Any thoughts on how much better powered CBs works vs the regular kind as to whether they're worth the expense?


The 1st one plugs into a frequency generator. The Freq. Gen. then plugs into a 110 wall adaptor.

My take is that it does not work much better as a CB. Instead it seems to become some form of large, strange, radionics type device.

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Tue Feb 21, 2017 2:50 am    Post subject: Reply with quote

What i REALLY want to do is connect a giant, perfectly ground, double-terminated lemurian crystal, w/ proper positive n negative points i can connect wires to, directly into a 110 wall outlet on one side connected to the pipes then grounded to a 8 foot copper lightening rod. Shouldn't be that hard, right? It would be more interesting to add a capacitor and an inductor to the above circuit so we could try to phase the electric & magnetic fields in order to get better radio transmission n maybe 'push' or broadcast the orgonite field to a broader area, the physics for which is discussed below.

The above captioned cloudbuster is generating voltage from the quartz crystals being subjected to maximum squeeze from the resin which generates piezolectric resonance between the crystals & shredded metals that create more hertz (like a simple marconi stop gap transmitter IS same thing as a Tesla coil spark gap transformer) until we get a volt, emf field, & rf transmission. Did you hear that people? When you create a volt there is an inevitable radio frequency emission, which creates a 'carrier wave'.

The reverse-piezoelectric effect occurs in the opposite way. Put voltage across a piezoelectric crystal and you're subjecting the atoms inside it to "electrical pressure." They have to move to rebalance themselves—and that's what causes piezoelectric crystals to deform n slightly change shape when you put a voltage across them.

Whenever u a piezoelectric crystal is subjected to adequate pressure the RESONANCE (this is Tesla stuff they doing teach in school). Resonance increases to make enough hertz to FINALLY CREATE A VOLT. When you create a volt you create an emf field and rf, or radio transmission- it's important to understand emf & rf are not the same thing.

The rf emissions in our CBs n all orgonite are caused specifically by the energy flux between the electric field (voltage) & magnetic field (amperage or current) combining into the electromagnetic field.

To give you an example, the original radio transmitter was called a ' Marconi stop-gap transmitter', which worked via the igniter's piezoelectric crystal generating an electric charge when squeezed & when discharged, the resulting spark sets up a (briefly) oscillating current in the two halves of the transmitter, which act as a dipole antenna. This current turns into a radio wave that can be picked up by a receiver. Spooky action at a distance. You will not understand that paragraph unless you go to Wikipedia to read what is a 'stop-gap', THEN you do research to discover the similarities between our cloudbusters, the first radio the 'Marconi stop-gap transmitter & the original Tesla coil which was nothing but a spark-gap transformer using the the principle that when a spark jumps across a spark-gap n turns into plasma n reappears on the other side it picked up a whole lotta voltage from somewhere that it didn't have before.

Aside from the orgone field we know is there, a cloudbuster IS a radio transmitter, & the copper pipes are antenna. To make a radio transmission move freely in space the electric & magnetic fields have to be alternating in-phase & perpendicular to each other. This is why a capacitor is not a good antenna: it creates a strong electric field, but bc the magnetic field is relatively small it radiates a little bit but mostly the energy is stuck in the electric field unable to radiate away because it has no magnetic field to carry it away from the capacitor; conversely, an inductor makes a poor antenna bc it creates a strong magnetic field but has no voltage to be pushed with, u dig? Yang goes nowhere without being pushed by yin. Electric fields & volts are created with capacitors like piezoelectric crystals while magnetic fields which produce amps are created with inductors, or resistors.

Antennas are just leaky inductors or capacitors. A GOOD antenna is equally inductive & capacitive simultaneously such that their impedance is purely resistive at the design frequency so they create magnetic and electric fields perpendicular and in-phase, which when tuned properly radiate MUCH further. A cb is basically a piezoelectric voltage-generating capacitor & Starseed's tactical induction coils are the same thing as an inductor or resistor intended to modify an electric field back into a magnetic field in a circuit, and/or provide amps to push the carrier wave created by the volt. That's why they work in orgonite, RIGHT, & whoever named them induction coils, Starseed I presume, knew that, no?

Btw, my brother's little $2k hobby oscilloscope is nice n successfully measured the CBs voltage (electric field), but it is ALSO generating current/amps/watts (magnetic field)- we just don't know how much bc I need a better oscilloscope for that measurement. A lab-grade oscilloscope starts at $75k n u can spend half a million on one easy, my brother told me. Edit from two weeks later: that hypothesis was WRONG!!

I'm going to build a powered cb with an inductor n a capacitor in the circuit, mark my words, before this summer is finished, I vow it. Nothing short of an act of God will stop me from building one of these things. I don't have any idea how I could properly phase such a circuit to broadcast orgone energy most efficiently, but I have until October to maybe figure it out. This is hundred year old technology n if I can find the right guy to explain it to me like an mit-trained taoist radio engineer it's probably not that hard so we can not maybe but definitely repurpose existing technology rather than reinventing any wheels, i'm sure of it. EDIT from 2 weeks later: I found out its really not that hard at all...

I expect help from the community please. Are we purposed to to seek unknown final frontiers in orgonite advancements, to go where no man has gone before, to explore strange new worlds n civilizations while always following the Prime Directive of using whatever weird technology pisses off the mib in their black helicopters the most, or r we just charlatans whistlin' Dixie, 'cause I thought this was WarriorMatrix so I say let's bring it! Do you monkeys want to live forever?


Last edited by Johnnyusa on Tue Feb 28, 2017 11:52 pm; edited 24 times in total
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Tue Feb 21, 2017 3:43 am    Post subject: Reply with quote

Sensei said: "1st one plugs into a frequency generator. The Freq. Gen. then plugs into a 110 wall adaptor.

My take is that it does not work much better as a CB. Instead it seems to become some form of large, strange, radionics device."

That's awesome how the sp plugs right into the frequency generator that goes right into the wall. I'm going to order one of those things to put in a charging plate as soon as the weather warms up enough to pour. Very helpful advice, sir. I want a radionics device to zap myself, but I don't need to spend my money on a sp powered cb. How much juice from the wall outlet is actually juicing the crystal in the sp thru the 110 volt power regulator? 15 hertz doesn't sound like a lot of power.

THIS IS MY QUESTION: If I have a big enough crystal properly grounded to a 8 foot copper lightening rod then is there some reason u can tell me why I can't theoretically connect safely straight into a 110v outlet n get as many amps as the breaker will allow, or even plug straight into a step-up transformer if I want?
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Wed Feb 22, 2017 12:22 am    Post subject: Reply with quote

We're testing the cb again. I got 20.875 volts at 60 hertz/second this time. A cloudbuster is basically a Tesla coil bc the voltage is generated by a stop gap transmitter SAME as a Tesla coil stop gap transformer. When a spark jumps across a spark gap n turns into plasma it has more voltage than it did before. I know, u could've knocked me over w/ a feather too. Duh!





My brother has a 20 amp A/C generator, & a copper ground connected to a buried 8 ft lightening rod ground. You can see the copper ground connected to the oscilloscope. Here is a pic of the copper ground leading into the earth where u can't see but there is a buried 8 ft copper lightening rod (ground).



Using the copper ground attached to any of the copper pipes, we were able to completely ground out the cb. So, I conclude that it is safe to pass electricity thru. We ordered a 50 ohm 100 watt resistor to protect my brother's equipment & so we can run more voltage than can otherwise be drawn from a 20 amp power generator. I should be able to flow at least 80 volts n 100 watts thru the orgonite matrix safely, so long as it's properly grounded, which I am sure is the case, but my brother said we'll test it outdoors instead of in his lab anyways Wink EDIT FROM 2 WEEKS LATER. I realized just in time this might not be safe. I am scared of high-frequency rf like microwave for some reason n i dont like strong emf EITHER, so I decided to think about it for awhile until I can find a secluded place to test such a device as a weather modification device. I expect this puppy to have some real interesting results, but keep away 500 ft is my advice n be careful bc that kind of amperage is dangerous. Back to 2 weeks ago:

Just waiting on the resistor to get here from Amazon.


Last edited by Johnnyusa on Thu Mar 02, 2017 1:35 am; edited 10 times in total
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Wed Feb 22, 2017 2:56 am    Post subject: Reply with quote

Can u dig it?

https://m.youtube.com/watch?v=bTUrWYv2vtU
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Wed Feb 22, 2017 3:31 pm    Post subject: Reply with quote

If this thing is generating 20 volts, does anybody have any idea why when I touch the copper pipes I don't get shocked?

There WAS smthng weird when we took readings yesterday. It took us four or five tries to get a pulse on the cloudbuster, meaning the first few times we connected the oscilloscope lead to the copper pipe we couldn't detect anything. Then finally, after 5 tries, we got a signal again. On our first test, we absolutely got a 17.5 volt signal we weren't expecting the FIRST time we connected the oscilloscope lead to one of the cloudbuster's copper pipes. My brother thinks the mib might be screwing w/ our equipment, but imho a more reasonable explanation might be:

This cb is a pure capacitor so it is generating voltage & an electric field but it doesn't have no inductor so there is no amperage or magnetic field. The push don't got no pull, a capacitor or inductor alone makes a poor antenna bc a high voltage electric field cant go nowhere without a magmetic field providing current, or amps. EDIT: after connecting an amp meter, I can report it is true my cb was generating 21 volts @ 60 hertz/sec w/ no amps. Zero. I guess you can have voltage without amps. Does that mean it is possible to have an electric field without a magnetic field, bc I have heard of emf but never just ef, or my (magnetic field). END

Before my hypothesis was my oscilloscope is too cheap to detect my cb's amps, but now I must question that hypothesis bc I think is either no amps or very low amps. I am not sure if when you generate a volt there must be resultant amps as well; I don't think so- I think capacitors create pure electric fields w/ a buncha volts, but no amps or magnetic field. A cb is a pure capacitor bc the piezoelectric charge from the crystals generates voltage between the metal shards like a Marconi stop-gap transmitter OR Tesla's original 'Tesla Coil', which was just a spark-gap transformer demonstrating the phenomenon that when a spark jumps across a spark gap n turns into plasma it has a LOT more voltage than it did before. EDIT it is good to question everything, esp ourselves END

That's the best hypothesis we could come up with after talking it over with my brother about why can't I see sparks inside this thing (it's resonance/voltage for sure but if not a spark wtf is it?) & I'm pretty sure we're right, but would appreciate input.

So if my hypothesis is correct, how do I give the chembuster the amps she needs? Hmmm. I could do it the natural way, when I build my next cloudbuster I will be sure to use VERY LARGE DENSE steel, copper, silver, iron, aluminum induction coils bc I think once I add nasty electricity from the outlet this chembuster will not be very safe to stand close to anymore. Now you run some of that radiant tesla electricity that Mr Morin demonstrates in the video above that never burns out a light bulb n it'd prob be a different story. A tale of natural vs artificial electricity.

Anyway, for now if I want amps i still need a resistor, don't I? We DO have a 1 watt resistor HERE and we are about to provide amperage to the chembuster NOW. Or as soon as I can get my brother downstairs to show me how to hook all this stuff up. Anybody want to see pictures? I wouldn't know any of this stuff if I hadn't watched a few of Gerald Morin's videos. EDIT screw that no way I'm connecting themail cb to amps right outside my house 100 ft from where my family sleeps END


Last edited by Johnnyusa on Wed Mar 01, 2017 12:07 am; edited 2 times in total
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Thu Feb 23, 2017 2:14 am    Post subject: Reply with quote

So we have a bunch of volts & we need to convert them to amps somehow, to broadcast the orgonite field more efficiently. I don't want to plug in to the wall bc that electricity will make the cb not healthy anymore.

We didn't get to hook up the 1 watt resistor today. Don't worry, itll happen soon & we'll have 80 volts flowing thru that cb, but I am a little worried it's not going to do anything except make anybody close to it really sick. I have no idea what kind of rf transmissions it will make, & I don't really want to piss off the FCC. I think once I add amps to the cb thru the copper pipes I will be able to see sparks inside the orgonite matrix but I dunno u guys think the cb will be safe to stand close to?

I'd rather figure out how to convert some of that voltage the Tesla coil is generating FROM THE CRYSTALS into amps. My best candidates are large heavy induction coils or a resistor w/ a copper wire going in both ends to pick up the voltage from the matrix n turn it into amps, current, watts, & the magnetic field we need so our orgonite will broadcast further.

There is also something I just read about called a Faraday Disk that makes amps.

Any ideas how to convert a significant amount of our voltage inside the orgonite matrix into amps?
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Thu Feb 23, 2017 3:12 pm    Post subject: Reply with quote

I have three ideas on how to create amps w/o plugging into the nasty wall. All we need is a 50 ft spool of unwrapped insulated speaker wire, preferably copper or gold.

I got a buncha volts that I need to convert to amps so our chembuster antennae will broadcast the orgone signal further by generating volts (electric field) & amps ((magnetic field) in-phase at the correct impedance, eventually.

1) This article talks about exactly what an inductor is & how all we need to do is buy a spool of speaker wire. The inductor core can be either air, or a MAGNET to make it stronger.

http://www.build-electronic-circuits.com/what-is-an-inductor/

2) Here in this video about induction, Mr Morin also uses a spool of unwrapped speaker wire as an inductor. Then he demonstrates an easy way we could add amps without electrons into our chembuster using an induction stove plate- this would be alot safer than plugging straight into a wall outlet.

https://m.youtube.com/watch?v=XzWpnDorI3U

3) I'm wondering if I stick a copper wire in both ends of a resistor n drop it in when pouring, is it going to short out or will it pick up the voltage in the matrix n convert it to amps for me?

Here's an article on resistors. I didn't read it yet. No way to know unless somebody tries on a smaller pour AND has a control to compare it against AND access to an oscilloscope preferably, but measurement for amperage is easier/cheaper than voltage bc voltage got no electrons in it, mr morin said. That's why my fkng cb is generating 21 volts n it's not shocking me- it has a ton of piezoelectric resonance but no current.

I guess it's time to order more resin altho im moving & won't have access to this oscilloscope forever.

http://www.build-electronic-circuits.com/what-is-a-resistor/


Last edited by Johnnyusa on Thu Feb 23, 2017 10:49 pm; edited 1 time in total
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6660
Location: Here Now. Somewhere Else Later

PostPosted: Thu Feb 23, 2017 4:07 pm    Post subject: Reply with quote

It is a good idea to protect your meter with a resistor in the circuit.

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Thu Feb 23, 2017 5:10 pm    Post subject: Reply with quote

The polyester resin might be a problem guys if we want to generate volts AND current like a real antennae. The composite polymers in our resin is the same insulator used for high-voltage power transmission lines, I read on Wikipedia. The resin provides terrific squeeze to generate the piezoelectric voltage, but it's shorting out any amps that might have been available to shock me otherwise when I touch the cb's copper pipes. Yea yea i know, it needs to be organic but does US Composites sell anything or have the ability to mix me smthng organic that provides similar squeeze yet is more conductive & less insulating? I read on Wikipedia it is possible to make epoxy more conducive by mixing in silver powder & I'm wondering if that might help, yea it would be interesting experiment anyway right? I think the metals in our orgonite is already like the silver powder in the epoxy.

That's my new hypothesis n I'll test iout somehow w/ an amp meter soon. This ain't nothin' but nature's laboratory.


Last edited by Johnnyusa on Wed Mar 01, 2017 12:14 am; edited 1 time in total
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 127
Location: Texas

PostPosted: Thu Feb 23, 2017 5:19 pm    Post subject: Reply with quote

Sensei, we have a 1 watt resistor I haven't tested out but will today prob, & I ordered a 100 watt 50 ohm resistor. But I don't really want to use nasty wall electricity. I don't even have the 6ft pipes to attach in order to test it as a powered weather modification device, the experiment I am very excited about doing. On a farm, w/ 80 volts juicin' thru the cb that is a minimum of 500 ft away from any sentient flesh n blood being.

I want to convert the existing crystal voltage in the cb into amps using a big spool of gold speaker wire with a neodymium magnetic core, or otherwise induce electronless amps via an induction plate like mr Morin does in above video. THEN we need to figure out how to phase the volts n amps to correct impedance. Maybe i could find somebody used to be in radio, owned a radio stations or smthng, if he knows a radio engineer I could pose a few questions to. I'll walk straight onto a university campus if I have to until I find a starving radio engineer grad student who will tutor me for $100/hour.


If I run amps from the wall thru that cb it is going to generate harmful rf. I KNOW IT. That would defeat the purpose of the device. Plus, free energy is cool, 'ya?


Last edited by Johnnyusa on Thu Feb 23, 2017 10:52 pm; edited 1 time in total
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Questions and Answers All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum