HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
Neodymium magnets & coil gauge size + safety concerns

 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction
View previous topic :: View next topic  
Author Message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 126
Location: Texas

PostPosted: Fri Feb 24, 2017 5:21 pm    Post subject: Neodymium magnets & coil gauge size + safety concerns Reply with quote

Geez, neodymium magnets are kind of expensive, & we need the most expensive kind made from rare earth metals in order to survive the hot temperatures of resin catalysization that hit 375 bc a regular neodymium magnet will lose magnetic properties at that temp.

Anybody recommend best place to get best-priced neodymium rare earth cylinders & bar shaped, so I can get an induction coil wrapped around it? They sell'em on Amazon n i guess I can just connect'em together w/ a piece of iron in between...

Let's be clear what we are doing here wrapping a wire around a magnet to create an induction coil. We will create a powerful magnetic field that will create amps or watts in our orgonite matrix, which is purely a voltage-generating piezoelectric resonator at the moment. I think if we add enough amps to the orgonite matrix we will be able to see sparks inside and perhaps zap ourselves upon touching any copper pipes that might extrude from the matrix.

See, I sleep w/ my hhg 2 inches from my heart sometimes, & I know that hhg is generating emf, rf, & an orgone field. I have read people say that cloudbusters or orgonite w/ magnets in it give them headaches, so I am wondering if it is safe. By adding amps, what we are essentially doing is creating electrons or current where previously our cloudbuster was creating only volts and transmitting...what, if Mr Morin says voltage got no electrons then what is sunshine, protons maybe, but the point is maybe when we create amps w/ an induction coil to amplify the frequency of a carrier wave it might be um dangerous when the signal gets enough current to hit the radio n microwave part of the spectrum?

Whenever you create a volt there is inevitable rf emission creating a 'carrier wave'. When we add add amps, we are adding current to that carrier wave. If u add enough current to a carrier wave I think it eventually hit the microwave n gamma part of the spectrum, which I suspect you might not want to emit inside your house for any good reason.

Voltage isn't as dangerous as amps bc voltage contains no electrons (according to tesla people like Mr Morin) n altho voltage emits rf the carrier wave has no current behind it, so it's safe like sunshine pure photon volts but no electron-containing current to push the carrier wave w/ enough energy to be dangerous. But voltage can still kill 'ya so if my cb is generating 21 A/C volts @ 60 hertz/sec somebody tell me why it doesn't zap me when I hold a copper ground wire connected to a buried 8 ft copper lightening rod ground in one hand and all 5 of my cb's copper pipes in the other to complete the circuit, WHY DOESN'T IT ZAP ME? The 60 hertz/sec is close to the wiring in our house an expert named Sensei pointed out so I need to do so oscilloscope measurement w/ the cb on the ground outside that I have yet to conduct, but surely the cb isn't sucking 21 volts out of the air, altho it was a good point by Sensei the 60 hertz/sec is a strange coincidence that needs more investigation. I wonder if the cb might be electronically aligned n in tune w/ the house's power grid, bc I carried it right from our living to my brother's lab/shed outside to take the oscilloscope measurement.

In physics, Energy= Volts x Watts, so if there's a bunch of volts n no amps the equation equals zero n we're safe so long as u don't add an inductor to amplify the carrier wave. I'm personally satisfied w/ that answer. Its not what i dont know that scares me its what i dont know that i dont know.

Starseed thank you for teaching me about induction coils n tactical orgonite, but we will be worse than monsanto if we are not careful w/ keeping that tactical stuff in lakes n streams & buried under death towers, but don't sleep w it two inches from your pacemaker like I do my lovely purely capacitative amethyst hhg I bought from Sensei that doesn't have any induction in it, thank God, bc ONLY BUY YOUR powerful ORGONITE pieces FROM SOMEBODY KNOWS WHAT HECK HE or she IS DOING unless you're keeping it outside or far away from organic carbon based esp flesh n blood sentient visible beings regardless of race/sex/orientation/political affiliation, or we might all collectively have a bad time. Jus' sayin'.

This thread is actually starting to scare me, maybe a mod should delete this bc you won't hurt my feelings, I can see how this knowledge could be used for evil in the wrong hands if the wrong person reads this. Up to you. I can't believe I'm the first person on here to point this out. Do I get a gold star or anything?

Simply put, I'm not sure sleeping with a piece of orgonite with a powerful induction coil two inches from my heart would be safe if I had a pacemaker. Remember the heart also generates volts & therefore its own emf field & rf emissions. My hypothesis is the electric field generated by the crystals energize our mitochondia- that's what capacitators do they generate electric fields, inductions coils generate magnetic fields. So i think our body's auric field is fed by the healthful, aligned, & harmonized electric field created by crystals and orgonite.

I'll bet amps n induction coils DO add a heckuva punch to chembusters!! I'm not just talking about a couple of amps here, for safety's sake let's REALLY be clear: I already have 21 volts @ 60 hertz/sec in my chembuster- that's enough to be potentially dangerous. The power supply for my laptop uses 19.5 volts but only a very small fraction of that is actually juiced into the computer. It's not that hard to create amps when you already have a bunch of volts. All we have to do is convert volts to amps bc w/o volts I'm not sure how to make amps but $100 worth of neodymium magnets wrapped with a (properly grounded) copper induction coil dropped inside the electrically charged orgonite matrix will positively not maybe generate a TON of amps. If I don't get constant sparkage I'll be amazed, but it won't work unless a wire from the coil is properly grounded. Edit summer 2017: I learned later that amps and watts basically require some kind of motion, or moving part, like in an induction motor. Adding coils will create a magnetic field, but not current. Current requires motion and you can't get that from a solid-state device absent electrical input. But then again i don't think you can have a volt with zero amps and watts, so if orgonite has measurable voltage there must be at least a tiny amount of amps and watts? I dunno.

Its natural amps true but I'm not even sure if it's safe to keep a large such device outside your house. I'd bet my britches it will make a wonderful weather modification device bordering on having your own HAARP array that's never gotta be plugged into a wall outlet. Ever. But you could if you wanted to using a simple 20 amp a/c power generator hooked up to a 50 ohm 100 watt resistor clamped onto the copper pipes, or more safely by adding electronless amps from a tesla-coil containing induction plate stove, available on amazon for $50. Just sayin'. It's not hard. None of this is the slightest bit difficult so far.

I think some of the capacitator charge from the crystals is leaking into the air thru the copper pipes, & if so how much does 15 mm gold or silver-plated copper pipe custom job cost from a skilled silversmith, bc then again that's what we want right is the orgone to leak out the cb's copper pipes, but wouldn't it be cooler if it was leaking out of 15 mm gold-plated pipes? The capacitance leaking out the pipes is one possible reason I'm not seeing sparks. How do you get voltage without a spark? I obviously do not have a full understanding of the only possible way to actually create a volt. I definitely have resonance/voltage, but if it's not a spark wtf is it? You can't create a volt without a spark, I thought, but obviously I'm mistaken bc I don't see no sparks. The way you create a volt is you somehow create enough resonance to create enough hertz that u get a spark jump across a 'spark-gap', urning into higher-voltage plasma THEN you've created a volt (& emf/rf transmission)... that's how tesla's first 'Tesla Coil' worked AND the first radio ever invented the Marconi stop-gap transmitter... that's how our CBs work too... somebody help me out here...how do u creste a volt without a spark? An automobile engine won't fire unless the spark plug is working, right, which requires a spark-gap jump?

What is the biggest gauge wire I should be buying to wrap a magnet with? Of course it depends on the size of the magnet, right, you can't wrap a tiny magnet w/ thick speaker wire, so anybody got recommendations on magnet size? I pretty much just want the biggest one possible, right, & I'm willing to spend $100 on neodymium magnets for my chembuster that I will be keeping OUTSIDE, but I would like some smaller induction coils I can fit tactically in tbs n hhgs too, charging plate, whatever...

Also looking for ideas for grounding a cb VERY well, like as good as a real transformer. I need a good connection to ground. I know there is a search function n dont worry I've read it. I like somebody's idea for a 3 inch copper screw (pushed into the orgonite during the pour at the proper time which if u don't know this isn't a 101-level post)) that can be connected to a wire going to a grounding rod.

It would be cool if I could just buy the induction coils already wrapped in EITHER crystals or MAGNETS for inductance in various sizes from Sensei. The nice thing about an induction coil wrap vs a mobious coil wrap is I can do it myself; in fact, I don't even have to unwrap a coil of speakerwire for it to function properly as an induction coil unless I want to wrap it with a magnet so long as both ends are bare & one is grounded, we could literally drop a toroidal transformer into the matrix n it will create amps ( if properly grounded). Remember, Google is your friend. This post has gotten a lot of hits but nobody commenting so now I go bk n clean post up to make language realing nice pleasant, succinct but fun, & clear, so c'mon people let me get some comments pls?

I am appropriately cautious of induction coils now bc yesterday I read this article explaining the physics of what an inductor does so now I understand an insulated copper wire in the middle of an a/c circuit creates amps bc the wire has d/c flowing thru it which disrupts (antagonizes) the a/c electric field & creates a magnetic field which generates current, or amps. Orgonite generates volts in A/C, not D/C. Btw.

http://www.build-electronic-circuits.com/what-is-an-inductor/

So what happens when you wrap a neodymium MAGNET with a mobius coil, rather than the mobius-wrapped crystals available for sale on OC? If anyone can post a simarly comprehensive link explaing the physics of the field created by a mobius coil that has electricty flowing thru it i'd truly like to read it. All I know is I can't wrap a mobius coil myself w/o at least two hours intensive practice watching youtube video, but I wish I could buy them from a skilled craftsman i can trust instead. I wouldn't mind tossing a couple mobius-wrapped neodymiums into the matrix to see what happens. I don't even know for a fact mobius coils are strengthened by magnetic fields, they could be antagonistic n counter-productivity costs me time money & device efficiency, so if anybody has a link explaining the physics of a mobius coil i'd appreciate it. I dont believe in dogma i need to understand to believe.

EDIT: I'm not sure if a mobius wrapped crystal generates scalar waves, but after googling the question I can see when you wrap a coil like that in a figure eight so the two wires' magnetic field hit each other @ 45 degrees IF they really do cancel each other out i can see that might be more healthful for life bc too much magnetic field creates amps which are dangerous, but then the 21 volts my cb generates SHOULD shock me, but what the hell do I know? A lot of people trying to create scalar waves use a bifilial coil which does the same thing cancelling magnetic waves, so would a bifilial coil work as well as a mobius wrapped crystal, or magnet, & what's the difference? I am pleased at least to realize what I don't know before whereas before I didn't know that I didn't know. Thats the biggest progress there is, u gotta take that leap, search it out even, question everything especially yourself, or there is no hope.

If a magnetic field is antagonistic to whatever current or field is generated by a mobius coil, then I would only want to so wrap a capacitator that generates pure electric field, like the mobius-wrapped lemurian crystals available from OC. Is that why you don't sell mobius-wrapped neodymium magnets, Sensei? Bc I'd like to buy a couple...

What happens when I wrap a capacitator like a lemurian crystal w/ an induction coil? What happens in an electrical circuit when you touch an inductor to a capacitator? Do I finally get some sparks? I think it's gotta be grounded right properly ya'll n we might get some sparks...n that'd be cool (best Beavis n butt head impression. Wow this edit job took an hour sorry this is long).



Last edited by Johnnyusa on Sat Aug 12, 2017 5:59 pm; edited 7 times in total
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 126
Location: Texas

PostPosted: Sat Mar 04, 2017 4:54 am    Post subject: Reply with quote

I looked into it. I dont think it can be dangerous if we add all the induction we want to a cb. It doesn't get really interesting until we add current, which isn't the same thing as amps. It requires motion, like a Faraday disk or homopolar engine creates current by moving a smaller magnetic field inside a larger electric field. A cb could maybe with induction generate the power necessary to run such a dc electric motor, or to be able to turn on a light bulb / black light rom electricity generated by the cb itself would be cool. So voltage is generated by the crystals & amps are generated by the magnetic field, but current must be created by motion, which is precisely why Tesla invented the a/c induction motor.

Edit: I changed my mind it might not be dangerous. I read the definition of a volt someplace & it's something x ohms. So to get a volt there's gotta be some resistance. I'm pretty much not comfortable using inductive orgonite for anything other than keeping outside of the house strictly for chembusting, & i'd surround the inductive cb w/ a grid of unconnected purely capacitative orgone pyramids.

I believe the chembusters could be hooked up in series in a polyphase system. When you hook up two ac capacitators in a row (in-series) it becomes a 'two-phase' rotating magnetic field n that's when they stopped having to windup cars to start them, but three-phase polyphase system of three capacitators hooked up in series is ten times more power. I'm starting to wonder how I can drill into my existing cb so I can hook it up in series w/ the new improved next generation model coming out soon.

Hooking 3 CBs in-series w/ full induction and using that power to run an induction motor would create a transformer. I gotta wonder how much electricity we could make if we hooked it up to a charge controller to store in a home battery?


Last edited by Johnnyusa on Mon Mar 06, 2017 11:35 pm; edited 2 times in total
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6659
Location: Here Now. Somewhere Else Later

PostPosted: Sun Mar 05, 2017 6:39 pm    Post subject: Reply with quote

K and J Magnetics.
Check the surplus section for great deals.

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Johnnyusa
Member


Joined: 02 May 2016
Posts: 126
Location: Texas

PostPosted: Mon Mar 06, 2017 2:43 am    Post subject: Reply with quote

Thanks, Sensei, I'll check it out. I ordered a bunch off Amazon n ebay. Will ferrite iron work if not quite as well as neodynium magnets, or does the heat kill them?

I tried to stick some neo mags to my cb n was surprised to see they wouldn't stick. Not even to the copper pipes. I didn't know magnets don't stick good on copper or aluminum, which is mostly what I used in the cb, along w/ a small percentage of tin & bronze. If we want induction the orgonite needs some iron or steel at least surrounding the magnets?
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 126
Location: Texas

PostPosted: Mon Mar 06, 2017 1:52 pm    Post subject: Reply with quote

I wish I could get Starseed's input on induction coil design. Once I realized the orgonite was generating not only real but significant voltage this became simple electrical engineering, which luckily I'm a philosophy major so I know nothing about.

Ok, if wrapping an iron bar w/ an electrified induction coil makes an electromagnet (which are not generally dangerous), then what happens when I wrap a magnet w/ an induction (or mobius) coil ???? Answer: a much stronger electromagnet-----IF IT IS PROPERLY GROUNDED.

Below is the best short answer in plain english i've ever seen from the Illinois Dept of Physics, but I still can't understand what they are saying. So to multiply voltages there has to be two coils connected together amplifying off each other, & the first air coil has to be connected to the second magnet-wrapped induction coil, right, with um how many coils again- does anybody get that part? Paging Starseed...requesting help from community pls, this stuff is way beyond me, I need help.
--------------------------------
http://van.physics.illinois.edu/qa/listing.php?id=2367&t=coiling-a-mag net

"You can bend a solenoid around on itself, no problem, and in fact many are constructed in exactly this way. The magnetic field lines travel along the length of a solenoid, and if you bend the ends around, you can get the magnetic field lines to go in a circle inside a torus-shaped coil of wire. You can increase the strength of the field by putting a magnetizable material inside -- a doughnut-shaped piece of iron, for example, will serve admirably.

If you wrap another coil of wire around the iron doughnut, and flow an A/C (edit: or dc) alternating current (induction-free orgonite produces a/c volts btw not dc, but no amps or current) through the first coil, the second coil will see a voltage across it, and the ratios of the two voltages in the coils is given by the ratio of the number of turns in the wire (because each turn adds to all the others). edit The ratio of wraps around the first to second coil is called the 'coefficient of self-inductance', it's a mathematical formula for electrical engineers not electrician's for transformer wraps using differential equations that u have to do right or an induction coil won't spit flame, meaning sparks or plasma which is the fundamental phenomenon in question, how to get the longest spark or most power. This is the big idea behind real high-voltage power transformers. edit: This is awkward reading and trying to correct my understanding a month ago w/ what I've learned since and have this paragraph still make any sense. It's not all correct, but I must leave it alone. A transformer does not transformer anything, the word itself is intentionally misleading- pole transformers MULTIPLY watts using induction, but they don't want you to know that. There are no electrons amps or watts in the transmission line until it hits the induction coils on the pole transformers.
---------------------

Edit: ok, I had to zoom in on the fundamentals of the relevant physics, but now I see how this is directly relevant to chemtrail busting, bc I didn't come all this way just to tilt at windmills. If we want the magnetic force to be applied in an upward direction towards the sky then current must be passed counter-clockwise thru a loop of wire to force the magnetic flux to push & radiate UPWARDS. If we do it the other way then the magnetic field will push downwards, which can we all agree is undesirable bc will decrease device efficiency?

http://makezine.com/projects/make-41-tinkering-toys/induction-instruct ion/

This is the new most helpful article I've ever found on the physics of induction. The question is whether the 21 volts my cb is generating now is enough to drill in a usable light socket, or must I add simply induction, which adds amps in particular but also volts; however, I don't think we get watts until we actually create current itself, which requires motion like a Faraday disk or the ac induction motor invented by Tesla himself. So can I plug in a lightbulb w/ my cb's 21 volts n zero amps, or must I add just induction, or must I add induction PLUS current??? That ladies n gentlemen is the million dollar question without which I can proceed no further. A cb would be more effective for a light bulb if the capacitance wasn't leaking out the copper pipes following the path of least resistance. Edit: to create a positive and negative terminal (anode & cathode) that jumper cables can be attached to, I think instead of copper one of the pipes has to be (soft) lead, & instead of being a pipe they must be solid rods like on car batteries. The iron or steel anode emits the electricity to be received by the copper cathode- that's only for direct current (dc) electricity. Alternating current requires both anode & cathode to be copper or for very high voltages a platinum/copper alloy bc platinum resists the corrosion caused by high-voltage induction. That was in 1904- i think they use tungsten now.

There are two directions to take this project: a) as an amplified crystal radio transmitter to push our orgone broadcast further, or b) hook them up in series for volts or parallel for amps or current into a polyphase system with a rotating magnetic field to analyze the power output by running it thru a charge controller ( analyzed by a pc program ) into a home battery setup intended for off-grid OR behind-the-meter energy production & storage, in order to see what it would take to turn orgonite into a real crystal-generated transformer generating real power or output without external input current being applied to the closed system- isn't that supposed to be impossible? Bc from where I'm sitting i simply don't understand WHY...

What in the hell is electricity anyway? It doesn't look that damn complicated to me so how come nobody taught me about this stuff in school? I went to decent schools- maybe it really is a huge conspiracy & it actually is really this simple.


Last edited by Johnnyusa on Sun Apr 02, 2017 7:43 pm; edited 8 times in total
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 126
Location: Texas

PostPosted: Wed Mar 29, 2017 1:57 pm    Post subject: Reply with quote

So I found out I was wrong about a couple things.

1) so long as the the wires in a coil aren't touching each other and no metal shards in the layer, then the wire can be uninsulated and still not short the coil, bc the polyester resin provides the same dielectric properties as the plastic coating on a wire. Is that the rule on orgonite electrical engineering?

2) the a/c current I measured from my cb pipes with my oscilloscope comes from voltage created by the crystals themselves, NOT spooky Tesla 'resonance' between the crystals & metals. I can put aluminum foil electrical contacts on any of my large dt crystals & measure the voltage w/ an oscilloscope. A 1.5 inch dt quartz crystal puts out at least 0.5-1.5 volts.

Hey when I hypothesize some stuff like that that's just plain wrong, willl somebody please do me a favor & correct me?

I think I was wrong about a bunch more stuff too. Anybody want to hear what?

For one thing, J think orgonite might be actually safer w/ just a little induction in it. Maybe pure electric lacking magnetic isn't as good as having the flux between the two.

I think I had too much purely capacitative orgonite in my room there for awhile. Took it out and weird spots on skin started going away. So so wrapped my bed in a 100 ft 12 gauge vopper house wire, Lakhovsky style. I got a ton of health benefits from the capacitative orgonite tho.
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6659
Location: Here Now. Somewhere Else Later

PostPosted: Wed Mar 29, 2017 7:04 pm    Post subject: Reply with quote

This is why we say to start simply.
Resin, without metal, will not short out uninsulated wire, but uninsulated wire will short itself out if wrapped in a mobius configuration or if wrapped around a metal pipe, even when submerged in resin with no metal chips or powders.

Start simple, so that you have a basic model to compare your more complicated, subsequent units to.

Don't forget to give some away. If you label it...

www.HumanGiftingProject.com

It will save you a lot of explaining.

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum