HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook

New NanoShield 7.83 Hz.and 528 Hz.
New NanoShield 7.83 Hz.and 528 Hz.
my big oops!

 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite and Crystal Photos !
View previous topic :: View next topic  
Author Message
somepisceschic
Member


Joined: 13 Dec 2016
Posts: 101
Location: GEORGIA

PostPosted: Wed Jun 14, 2017 3:44 am    Post subject: my big oops! Reply with quote

well i learned alot from this one. i was attempting to repour this because the top was clouddy (i used a new mold and i didn't realize i needed to tape the bottom so the resin was seeping out. i caught it and taped it) also, it cured kind of clumpy. i think it was the resin. it was epoxy and the resin was kind of thick. so when i was mixing it, i noticed a lot of bubbles so i used a hair dryer to warm it up. i guess i warmed it a little too much because as soon as i started pouring it, it started to harden. this is the result. i will figure out something to do with it. any ideas?

[img]20170603_224014 by Dee Neal, on Flickr[/img]


[img]20170603_224007 by Dee Neal, on Flickr[/img]

20170603_223659 by Dee Neal, on Flickr
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6748
Location: Here Now. Somewhere Else Later

PostPosted: Sat Jul 29, 2017 5:25 am    Post subject: Reply with quote

Can I ask how this turned out ?

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
somepisceschic
Member


Joined: 13 Dec 2016
Posts: 101
Location: GEORGIA

PostPosted: Sun Dec 17, 2017 5:45 am    Post subject: Reply with quote

Sensei wrote:
Can I ask how this turned out ?

Sєηѕєι


i just found this. it is still sitting. i haven't tried to fix it yet.
Back to top
View user's profile Send private message
dibspace
Member


Joined: 16 Sep 2015
Posts: 407
Location: Arizona

PostPosted: Sun Dec 17, 2017 3:04 pm    Post subject: Reply with quote

In that case, I would use that as a corner piece somewhere in the living residence...or maybe in the car or somewhere else Wink
_________________
Victory of the Light!
www.Truthearth.org
https://www.etsy.com/shop/Orgone333
Back to top
View user's profile Send private message Visit poster's website
Ruth
Moderator


Joined: 29 Mar 2010
Posts: 3302
Location: Oregon

PostPosted: Mon Dec 18, 2017 6:55 pm    Post subject: Reply with quote

When your resin is lumpy it's usually old. I use old resin for tactical pieces that will be buried or immersed. When making beautiful personal pieces with expensive ingredients I'd use new resin.

I have 3 or 4 gallons, both 3M and Sylmar, that are around two years old. I hope to use them up on large tactical pieces. Large pieces heat up more, and I'm hoping that the resin is still pourable when I am able to pour again:)

Ruth
Back to top
View user's profile Send private message
nathangjedi
Member


Joined: 09 Sep 2016
Posts: 61

PostPosted: Tue Dec 19, 2017 2:41 am    Post subject: Reply with quote

Orgonite doesn't have to be pretty to be effective.
Back to top
View user's profile Send private message
somepisceschic
Member


Joined: 13 Dec 2016
Posts: 101
Location: GEORGIA

PostPosted: Sat Dec 30, 2017 2:00 am    Post subject: Reply with quote

Ruth wrote:
When your resin is lumpy it's usually old. I use old resin for tactical pieces that will be buried or immersed. When making beautiful personal pieces with expensive ingredients I'd use new resin.

I have 3 or 4 gallons, both 3M and Sylmar, that are around two years old. I hope to use them up on large tactical pieces. Large pieces heat up more, and I'm hoping that the resin is still pourable when I am able to pour again:)

Ruth


Ruth thanks. Im gonna use this one for experiment's sake. I've been experiencing a host of trial and error as far as polishing and finishing goes. Using clear spray shellac doesn't look right to me. Brushing with a thin coat always turns out lumping. Recasting is too expensive. I found a great video on sanding and polishing epoxy... Just need to figure out the technique on the sanding part ..I will use that for my larger pieces. The smaller ones like pendants I will just recast in clear. That seems to be working well. For the real mess ups on the smaller one's they make for a pretty layer in a larger pyramid. double dose of orgone never hurt anybody. I gifted one like that to a friend. she wanted a cube and when it came out of the mold I just couldn't get it finished to my liking so I cast it as a layer in a pyramid. it was gorgeous. I sent it to her. she told me a week later it made her husband's mac go haywire. she said he was working on it and he couldnt control the mouse it kept going all over the place. they couldn't figure out why until they noticed he sat the pyramid next to it. so they moved it out of the room and did some research. turns out it was the pyramid. they don't keep it near the computer anymore lol
Back to top
View user's profile Send private message
Ruth
Moderator


Joined: 29 Mar 2010
Posts: 3302
Location: Oregon

PostPosted: Tue Jan 02, 2018 6:57 pm    Post subject: Reply with quote

If this were my mold I'd take it to a local body shop and ask them to buff the inside of the mold to a high gloss.

The inside of your mold is the surface of your piece. Maybe they can seal the corner for you without distorting the mold. Maybe if you explain what you're doing and gift them a piece or two?

I believe in doing as little finishing as possible by working on perfecting my casting techniques. Clean bottoms are achievable!

Ruth
Back to top
View user's profile Send private message
somepisceschic
Member


Joined: 13 Dec 2016
Posts: 101
Location: GEORGIA

PostPosted: Mon Jan 08, 2018 8:21 am    Post subject: Reply with quote

Ruth wrote:
If this were my mold I'd take it to a local body shop and ask them to buff the inside of the mold to a high gloss.

The inside of your mold is the surface of your piece. Maybe they can seal the corner for you without distorting the mold. Maybe if you explain what you're doing and gift them a piece or two?

I believe in doing as little finishing as possible by working on perfecting my casting techniques. Clean bottoms are achievable!

Ruth


ha! ok i actually have a bufer. i didn't think of that. I was wondering how to fix the inside of those molds. i banged my stainless stell molds up pretty good in trying to demold the pieces so now they cure with the little dents in them. barely noticeable but i don't like them. im going to post my latest. ive been repurposing my smaller pieces that have lil bubble holes in them. i just cast then as a layer so most of my larger pieces are orgonite inside of orgonite
Back to top
View user's profile Send private message
somepisceschic
Member


Joined: 13 Dec 2016
Posts: 101
Location: GEORGIA

PostPosted: Fri Jan 19, 2018 7:15 am    Post subject: Reply with quote

Ruth wrote:
If this were my mold I'd take it to a local body shop and ask them to buff the inside of the mold to a high gloss.

The inside of your mold is the surface of your piece. Maybe they can seal the corner for you without distorting the mold. Maybe if you explain what you're doing and gift them a piece or two?

I believe in doing as little finishing as possible by working on perfecting my casting techniques. Clean bottoms are achievable!

Ruth


Ruth...I FIXED IT!!! oohhh my was this some work. but i fixed it.

[img]Labor of love... by Dee Neal, on Flickr[/img]

[img]Labor of love... by Dee Neal, on Flickr[/img]

Labor of love... by Dee Neal, on Flickr

Labor of love... by Dee Neal, on Flickr

[img]Labor of love... by Dee Neal, on Flickr[/img]
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite and Crystal Photos ! All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum