HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
Aegis Cloudbuster
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next
 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction
View previous topic :: View next topic  
Author Message
Leo
Member


Joined: 03 Nov 2009
Posts: 741

PostPosted: Sat Oct 01, 2011 12:20 am    Post subject: CB mod Experiment & results so far.... Reply with quote

..ok. so was waiting for a really 'HAARPED' sky day to try out this, so any potential effect would be more noticeable if at all. My CB is not an iCB, but thought I'd give it a go none the less...

So here's what the sky looked before trying the expermiment... haarping up nicely.


[img]<a>sept-orgCB-assorted2011-pics 012</a>[/img]


[img]<a>sept-orgCB-assorted2011-pics 008</a>[/img]


To a total white out....

[img]<a>sept-orgCB-assorted2011-pics 016</a>[/img]


So following the idea..

1. one bucket(ok it's pink)..

[img]<a>S7001997</a>[/img]


2. filled it with water

[img]<a>S7002003</a>


3. got some white bin liners(white seemed a better choice of colour/tone than black)

[img]<a>S7002004</a>[/img]

4. placed the orgonite Lemurian cloudbuster in said plastic bags. Decided to double them up as the first attempt split then bag & water leaked inside. So doubled up white binliner bags.

[img]<a>S7002007</a>[/img]


5. placed the wholething in the bucket with water...


[img]<a>S7002020</a>[/img]


[img]<a>sept-orgCB-assorted2011-pics 007</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 006</a>[/img]


6. Ok, so rock'in & roll'in in the bucket with the plastic bag around the base...

[img]<a>sept-orgCB-assorted2011-pics 018</a>[/img]

7. approx 20 mins later, something that I have not seen here before...we have small light aircraft flying over occasionally as there is an airport 15miles north of here, though they have never flown right towards the property from the north east then banked sharply to turn away literally over the garden. It seemed quote a drastic manoeuvre for these parts. Was quite suprised, & obviously wondered if it was anything to do with the CB experiment. Anyhow in all the excitment I fumbled for my camera & just got a shot as it was flying away...Would be of been a great shot of it banking sharply across the sky just short of the property... like it was tilting on its side...& could see the underside of the plane at that point.. coincidence or not,here it is....

[img]<a>S7002023</a>[/img]

8. So that was 20 mins after setting this up...Was then still observing the skies patiently to see if there would be any let up in the haarp white out...

approx 40 mins later....

[img]<a>sept-orgCB-assorted2011-pics 030</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 031</a>[/img]

..getting clearer...some blue poking through even! Very Happy

]<a>sept-orgCB-assorted2011-pics 032</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 033</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 034</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 035</a>[/img]

Just kept getting clearer & clearer & clearer.....


[img]<a>sept-orgCB-assorted2011-pics 037</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 047</a>[/img]

until...approx 12.40pm... RADIANT CLEAR BLUE SKY & SUNSHINE!!!

[img]<a>sept-orgCB-assorted2011-pics 044</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 046</a>[/img]

9. Then out of the clear blue sky, well slightly hazey....suprise suprise...(or not as the case may be)

[img]<a>sept-orgCB-assorted2011-pics 045</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 043</a>[/img]

Wasn't really sticking though. the seeded variety...

10. It reflects well on you...mirror doubling up the whole thing.


[img]<a>sept-orgCB-assorted2011-pics 023</a>[/img]

11. so there it is..

[img]<a>sept-orgCB-assorted2011-pics 013</a>[/img]

[img]<a>sept-orgCB-assorted2011-pics 038</a>[/img]

conincident/relative or not, its been really nice weather here since setting up the CB this way & am really enjoying the effects. Really impressed with the 'anti-haarp attitude/action' of this thing...

There have been arrival of more Sylphs to the skies, as well as more opposing effect to such, will continue to monitor the effects of this & update you as & when.... am liking this alot.

thanks for sharing this idea Virgil!!

keep up the good work brother...

injoy!

Leo
Very Happy
_________________
Together we have PORtential!
Back to top
View user's profile Send private message
Leo
Member


Joined: 03 Nov 2009
Posts: 741

PostPosted: Mon Oct 31, 2011 12:02 am    Post subject: Reply with quote

.ok now I see the advantage of coating the base & base pipes with resin. As when it rains the plastic bag collects water inside which is meant to stay dry.

The only way around this(apart from resin coating the base & base pipes of CB, as I understand it), is to put a plastic cover/bag over the exposed part of the plastic bag the Cb is sitting in. Also I have put the wooden space the lowest it can go, so that it is acting as a water shield from the potential rain. This is working so far so good Very Happy

I have 5ft pipe extensions on three of my pipes, so that may be making some difference aswell.

I think I will resin coat the base when I get a chance. seems the way to go with it.


Very Happy
_________________
Together we have PORtential!
Back to top
View user's profile Send private message
Ruth
Moderator


Joined: 29 Mar 2010
Posts: 3282
Location: Oregon

PostPosted: Mon Oct 31, 2011 4:46 pm    Post subject: Reply with quote

Leo, did you use any bionized material in your CB?

Ruth
Back to top
View user's profile Send private message
Leo
Member


Joined: 03 Nov 2009
Posts: 741

PostPosted: Wed Nov 02, 2011 12:02 am    Post subject: Reply with quote

ah, no Ruth. I didn't use any bionised sand in the CB

though that is an absolutely brilliant idea!

will update my threads at some point, as there is so much more to share.

Loving this induction thing.


btw
(Also am asking for MBO's(most benevolent outcomes) for boosting/increasing the effectiveness/power of CB & orgonite.)

enjoy
Very Happy
_________________
Together we have PORtential!
Back to top
View user's profile Send private message
gemcutter
Member


Joined: 22 Jan 2011
Posts: 691
Location: The Netherlands

PostPosted: Wed Jan 25, 2012 5:02 pm    Post subject: Reply with quote

hi, I am planning to build my first cb soon, I have all the ingriedients now.
after a lot of reading I dicided that I want to make an induction cb/ aegis cb.
I want to build it so that the pipes are removable.

but there are some things I dont fully understand, so I have a few questions.

if I coat the short pipes in just resin a few times and then put them in orgonite, use copper connectors for the long pipes and dont put any crystals in the pipes, would that be considered a "true aegis CB" ?

or do I still need the insulating connectors/spacers for the longer pipes and the insulated copper wires in the pipes to achieve the induction?
Back to top
View user's profile Send private message Visit poster's website
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Wed Jan 25, 2012 6:47 pm    Post subject: Reply with quote

@cutter,

you got it right, resin coating work as insulation. this will be a induction cb.

the wire and insulating connector were for modding a standard cb to induction cb.

Enjoy!

Salut

Virgil
Back to top
View user's profile Send private message
gemcutter
Member


Joined: 22 Jan 2011
Posts: 691
Location: The Netherlands

PostPosted: Wed Jan 25, 2012 7:08 pm    Post subject: Reply with quote

thanx!

your modification with the wire gave me an awesome idea!

will try it and let you know!
Back to top
View user's profile Send private message Visit poster's website
gemcutter
Member


Joined: 22 Jan 2011
Posts: 691
Location: The Netherlands

PostPosted: Thu Jan 26, 2012 11:46 am    Post subject: Reply with quote

I have another question.

My pipes are 2 meters long and 3,5 centimeters wide.
I want to make a 30 liter CB.
If I use the flower of life layout for the pipes they come very close together, and the "pipe unit" is very narrow, relative to the size of the CB.
is this the way to go, or is it also ok to locate the pipes a bit further appart from each other?

for example on the next ring of circles in the flower of life pattern.
_________________
https://www.etsy.com/nl/shop/OrgoniteArtStudio
Back to top
View user's profile Send private message Visit poster's website
gemcutter
Member


Joined: 22 Jan 2011
Posts: 691
Location: The Netherlands

PostPosted: Thu Jan 26, 2012 2:04 pm    Post subject: Reply with quote

Im also posting this here because I came up with this idea because of this thread!
better said, it is the idea of this thread, just used slightly different.

in your mod you use the wires to achieve induction and to connect them to the CB pipes.
I dont fully understand the science but ok.
we all know pipes for a CB are expensive...... Sad

but the city is just full of metal pipes! with traffic signs attatched for example. in my city they are not capped....... so the top of the pipe is open..... Wink I bet you already feel where this is going.......

I got the thought of making long but narrow pieces with orgonite that fit inside those traffic posts.
and loop a thick stranded insulated copper wire through the orgonite matrix while casting.

after casting strip the ends of the insulated wire and make sure they spring outward!
so if you put it in a metal pipe from a traffic post the copper wires spring outward so they touch the pipe.

this way we could make use of the pipes that are all over town!

I made a quick drawing of the idea:
note: the traffic posts in my town are a bit more narrow in the top than the bottom, so its important that the copper wires spring back enough!



I hope you like the idea!

I am making a mold for it now! the silicone is curing now, will post as soon as I finish the piece!
_________________
https://www.etsy.com/nl/shop/OrgoniteArtStudio
Back to top
View user's profile Send private message Visit poster's website
Ruth
Moderator


Joined: 29 Mar 2010
Posts: 3282
Location: Oregon

PostPosted: Thu Jan 26, 2012 5:49 pm    Post subject: Reply with quote

Check out the posts on "fencepost EPs and HHGs". I haven't made any lately, but toilet paper tubes or better yet paper towel tubes cut in half make pieces that will fit into most posts in chain link fences and signs. Works great- I don't try to remove the papre, just drop them in.

When you pour them, just remember to mark which way the crystal is pointing. I just use a laundry marker to put an arrow on the tube.

The wire is a new take on this: next time I make a batch I'll give it a try.

Ruth
Back to top
View user's profile Send private message
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Fri Apr 13, 2012 3:49 pm    Post subject: Reply with quote

@cutter, i like the idea of the wire, induction device indeed. stealthy and versatile. and more important, close to the peoples.

on another note, about the wcb or submerged cb, i think it is important to add a circulation pump to the bucket. or if you cant you should stir the water once a day.

reich was also using agitator or running water.

the synergy is great. but at first i felt a little dizzy from such orgone displacement. close to orgone overdose.

like the indonesian and australian gifter, i advise a pump.

keep gifting

salut

Virgil
Back to top
View user's profile Send private message
intentional passerby
Member


Joined: 02 Dec 2012
Posts: 230

PostPosted: Fri Nov 15, 2013 12:17 am    Post subject: http://www.warriormatrix.com/viewforum.php?f=3 Reply with quote

Starseed, I want to ask you something. You said that resin shouldn't go into pipes (one time, probably for educational purpose), which is about strait resonance. It doesn't make sense to me, I think the important thing is induction/isolation of metal masses. Right? Toroidal shape might resemble heart pump more, because heart is inside body. I like how itb has vessels Razz

Or in practice:

Should I fill whole can with orgonite or only half (probably I will fill whole, but I want your opinion anyway)? Would this be can icb or can itb?
Can is insulated with paper on bottom (काम written on paper), duct tape on side and with small pieces of scotch tape to connect (there may be easier way to do this, using strait mold). It isn't just about induction, if resin doesn't get in the way I can can open down base, so it would be hollow.

About tapes, it may be possible that it's about constants in Maxwell equations (EM wave) as that changes frequency.

Your wcb is really wow and very likeable. Though I have to ask you: have you put salt and/or sodium bicarbonate in water (sea, attracting orgone)? This is used in gridbusters, but it may change transmission, so I don't know.

I love you (r work)
Back to top
View user's profile Send private message
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Fri Nov 15, 2013 1:34 pm    Post subject: Reply with quote

well i dont remember exactly when i said that or about what. at that time i was probably thinking a lot about what is occuring inside the inducted pipe and compression waveform and their scalability, around the same i was experimenting caped pipes and such. so yeah if you are aiming to get the best of compression wave the inducted pipes should be cleaner you can. but i have no 100% sure answer. i have seen many design of icb, all working. some were surprising by the innovation.

if you are talking an unexpected spill of resin in the pipes for whatsoever reason, i think you shouldnt worry. if the resin had a blocking effect on radiation, orgonite couldnt work.

you talking about a toroidal shaped icb? i have no objection whatsoever. did i ever had? if so i dont remember. so you might as well follow your way. what stand as really important and crucial is the induction feature.

i agree with you that a itb is a fascinating device. you ever tried to place one against you carotid artery? charged blood rushing through your brain... not half bad.

now about your design of itb. i have absolutely nothing against, in fact to be honest with you that design crossed my mind once and i would be thrilled to hear about it. some kind of orgone bell?

it is possible that different insulating matter might change a little the wavelenghts. but all that testing is subjective, so i tend to be carefull now when stating something. filling it half at first is reasonable.

go ahead and report if you wish. if you like that type of device then it will still be time to perfect it and give it some glamour.

i trust in your wayseeing.

About the wcb. i have only one reserve. the water must considered a perishable component, and here with the weather, having a five gallon inside the house with tube and funnels is just too risky for a mess. so i believe it fully suited for the tropics and the deserts and such were it can be placed outside year long and were a mess wont cost thousands.

and yes adding salt change the quality of the orgone field. not sure it is for the best. i would have to do more test.

thank!

salut

Virgil
Back to top
View user's profile Send private message
intentional passerby
Member


Joined: 02 Dec 2012
Posts: 230

PostPosted: Mon Nov 18, 2013 6:47 pm    Post subject: Reply with quote

I think on first page of this topic. It was repeated, so idea was gone, only to be reborn. Rest was to "justify" my design.

Maybe (paradigm that I subscribe to) isolation with tape is better then resin.

I did double toroidal, "PW" core and toroidal orgonite and toroidal can (it's capped, will remove cap).

This is mold, fully isolated. There is center, and kama on Devanagari written on paper that serves as down isolation.

It is later filled (quartz and calcite programed on coils 432 Hz (that and on PW are best way), other things on radiator). Blue kyanite (that has clear quartz) and a bit of copper wire was inside my resin mixer. Core has domestic milky quartz and 2 pictures of my favorite PW (22 mm * 22 mm). Torus part has hexagon try with milky quartz. All of it filled with resin, wrinkled cut Al foil and inox sponge chops (which prove too large for design). While orgonite cures I made them fire to look at it. There was a little fire on metal shavings that where sticking out, so resin caught fire (shavings where outside orgonite, so it wasn't big deal). Whether report says 2 C, there where 7 in morning. It looked like this (this is after curing).

There where some resin leftovers, so I miscounted xtals. End result being



While making it it put of a love vibe. While it cures I could feel it while it was 1.5 stories down, me being 1 dm from 200 m coils, radiator, PW connected to zapper.

I would say that it was success, when it comes to strength of such orgonite, but it didn't manage to clear up the sky. Maybe when I can open bottom it will. Just to be clear, there are 3 new things in design: picture of PW, isolated can and paper toroidal isolation. The theory was that PW creates orgone, putting it in toroidal part and then (when there is enough velocity because of induction) it goes to can which reject info, thus I except horizontal range with this one.

Thank you. This is without mold orgonite!
Intention out.
Back to top
View user's profile Send private message
starseed
Moderator


Joined: 21 May 2006
Posts: 1108
Location: Quebec

PostPosted: Thu Dec 05, 2013 6:14 pm    Post subject: Reply with quote

@intention, powered orgonite have quite the cloudbusting effect, i hate to break it to you but in order for any cloudbusting device to give permanents and visibles effects the nearests radars must be gifted. nobody gets passed that. some lucky folks awoken in a region were much radars are gifted so anything they do give great results. i dont mean to look down on nobodys work, but i am sure it happened to some.

here something strange that happened in the house of some of my relatives. that relatives has the habit of freezing water for when he works, in his canteen. that glass of water been there four days.

so here goes. it is not a experiment but rather an unexpected effect of one of my relatives work.



i remember seeing ice pick coming out of some experiment. but i dont remember seeing ice pick inclined to 45 degrees. but i have a poor memory.

now there was not an orgonite in the freezer, neither on top or below.

but look what is on the door...



theses are experimental induction pendant with a selection of grounding stones matched together with a brand new way of decoding matter.

some are also combinaisons of resins. top notch devices that i couldnt even dream to build.

all put together theses pendants barely equals the mass of a tb but they got some pull that is for sure.

some of theses pendants been there several months while other were put there not that long ago. and it is the fourth week in a row that it happens.

is it only the whole that is greater than the sum of its parts?

how knows, maybe the thick orgone field spread by Ison helped that happen a little.

Salut

Virgil
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction All times are GMT
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8, 9, 10  Next
Page 8 of 10

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum