HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
NANO ORGONE : A Solid Technical Advancement
Goto page 1, 2, 3 ... 12, 13, 14  Next
 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction
View previous topic :: View next topic  
Author Message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 11:24 am    Post subject: NANO ORGONE : A Solid Technical Advancement Reply with quote

I have always been clear that when I found a proven advancement in orgonite technology, that I would share and promote it. That time has come.

I have a story to tell....

...and it begins with a phone call from a successful Environmental Engineer. Born in Malaysia, but an American citizen for decades. His health situation required him to take some time away from working. He returned to Malaysia to visit family and while in his home village, went to see the Local Energy Master/Healer. The Master had a fine reputation for effectiveness and skill and had healed many people and evidently was very successful at clearing malevolent entities.

This is where it gets weird (You just can't make this sort of thing up, LOL).

During his first meeting with the Master, the Engineer is allowed to see and handle the Master's healing tools. He is handed several pieces of...you guessed it, Orgonite !
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Fri Nov 30, 2012 6:26 pm; edited 9 times in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 11:44 am    Post subject: Reply with quote

Rough and field grade, but yes simple orgonite.

The Engineeer is fascinated having never seen it before, is impressed and thoughtful when it's construction and use were explained to him. (The Irony of an American Engineer traveling to the other side of the world to have his first exposure to orgonite by a village rice farmer/Healer is almost painfully funny to me).

The Engineer's specialty is a new form of neutralizing in ground spills of extremely toxic industrial chemicals, like carbon tetrachloride. This is achieved by pumping in a solution of very reactive nano metals.

After absorbing what orgonite does and how, the Engineer informs the Master that the orgonite can be made much stronger by adding Nano Particulate Metal to the resin/ metal mixture. ( Not exactly correct, but close and a big step forward).

His health improving, the Engineer returns to the US . I get a call from him, asking if he can come to the farm and talk. We meet him and his wonderful family in town and having satisfied myself that he is sincere, we return together to my home.
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Sat Nov 15, 2008 12:02 am; edited 5 times in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 11:57 am    Post subject: Reply with quote

I will go into the math and tech details a bit later. For now this project is in it's 3rd month for me. Multiple pieces of Orgone Nano were constructed into pendants and test pieces, then distributed to experienced orgonite makers and energy sensitives, for use and evaluation at the time of the Atlanta leg of the Human Gifting Project.

The reader will know these people as they are active board members here. A month later most of them were invited here to pour the highly upgraded version for testing, then off to their separate destinations and another month of using the advanced pendant, and test pieces.

I would like to thank all of these great folks for taking time to come here, and working on this.
It was a wonderful experience. ..I invite these people to post on this thread, both the visitors who came here and those who got the Nano Pendants in the mail for evaluation.
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 1:37 pm    Post subject: Reply with quote

Here it is quick and dirty, I will flesh out the Tech and Psi later in this post.

The first thing to do was get more surface area of metal in the orgonite matrix. More metal to do the work in a much smaller area.

This is fine copper, like used in a Human Gifting Project Pyramid. It has a surface area of about 1/2 Square Meter per Gram.



This is Nano Iron, it has a surface area of about 15 square Meters per Gram.



30 times more surface area than the copper powder !

So I constructed the first test Pendants in an oblong form, with Gold, Nano Iron, a Blue Kyanite Crystal and a small Lemurian Seed Crystal inside.



A very strong pendant , that was Etherically unstable. I came to understand that the back and forth energy flutter I was feeling was coming from a 3rd to 4th dimension energy fluctuation.

Several weeks of testing by other energy sensitives and myself proved a sad fact.

Just adding Nano Metal to Orgonite was not working !!!

(In fact several of them were not able to wear it in that form. Too much jumpy, unstable energy)

WARNING, Do not just toss in some Nano Metal into your Orgonite expecting an improvement.

Also, For Safety at this time I am using ONLY FOOD GRADE Nano Metals. Yup, you can eat it.

It was several weeks before I identified the problem, a few more before the solution was clear. But I had no idea if it could be done.

A call to the Engineer, confirmed it was possible, but would require his lab equipment to produce.
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Sun Nov 16, 2008 8:04 pm; edited 8 times in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 1:47 pm    Post subject: Reply with quote

I have used every combination of metals, crystals, charged waters, additives,multiple densities of metals, and too much more to list, to produce more effective orgone generating material.

5 years of experiments have proved the superiority of Gold in the Orgone Matrix (it brings spiritual properties to the energy, I have no clear idea of why).

A Lemurian Seed Crystal is by far Superior to any other type of crystal, the reason is a bit complicated to explain now.

Back to the "Etheric Flutter" problem. A few weeks confirmed what should have been immediately obvious.
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 1:57 pm    Post subject: Reply with quote

The high surface area of the Nano Metal was WAY overclocking the ability of the Lemurian Crystal to keep up with the energy conversion. Too much metal surface area, working at too fine an energy density, for the crystal to do it's job properly.

The solution was to somehow get the Lemurian crystal to nano size, and lots of them.

Nano Lemurian Crystals were the answer !

I proceeded to crush 2 Lbs of Lemurian Seed Crystals from the Mine in Menas Gerais Brazil. ( This was incredibly painful for me to do by the way, I hope never to have to do that again).

I forwarded them to the Laboratory, where the Engineer processed them to a Nano form and sent the back, in solution.


_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Sat Nov 15, 2008 12:06 am; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 2:17 pm    Post subject: Reply with quote

The problem of using incredibly reactive Nano Metal and Nano Crystals in a catalyst activated resin mixture was quickly apparent after some ugly failures.

Eventually the physical problems were worked out in the curing... when an unexpected wonderful new option presented itself.

I am using Nano IRON !

It is Magnetic...Yippie !

Using a HUGE Neodium magnet at the right point in the curing process, I could actually realign structure the nano metal at a near molecular level.

Like it always does, one thing leads to another.

Using a Rife/Lakhovski type high energy plasma beam tube machine...I could actually structure and organize the Nano Lemurian Crystals !

Both the Metal and crystal structuring had to be done during the curing process.

BUT, Being able to change the frequency harmonics of the photon discharge of the plasma tubes... actually let me control the structure of the Lemurian Nano Crystals in the orgonite matrix. More on this aspect later as well.
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Sat Nov 15, 2008 12:07 am; edited 3 times in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 2:25 pm    Post subject: Reply with quote

Nano Lemurian Pendants and Nano Cat.



For size comparison, LOL.


_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Mon Nov 17, 2008 7:36 am; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 2:50 pm    Post subject: Reply with quote

A big, extra benefit is that ..Nano Iron ABSORBS MICROWAVES !!

I think you can see where this is going. Cell Phone protectors that ACTUALLY WORK.

Here is the Hard Science.

Pay attention to the last paragraph.

Page 1
MICROWAVE ABSORPTION STUDIES ON COBALT IRON NANO-ALLOYS
Vinod Kumar, R. P. Pant, Anu Rana, and Vikram Kumar
X-ray Section, National Physical Laboratory, Dr. K.S. Krishnan Marg, New Delhi-12, India
Tel: +91-11-45608309
Fax: +91-11-25726938
chaharindia@gmail.com
rppant@mail.nplindia.ernet.in
anu29rana@gmail.com
vkmr@mail.nplindia.ernet.in
Abstract
Cobalt iron (CoFe2) nano-alloy have been synthesized and studied for microwave absorption in the Ku band (12.4-18 GHz) region. Prepared material was analyzed for crystalline phase, crystallite size, particle size, magnetization and conductivity measurement relevance to microwave absorption. The microwave absorption studies of material have been done using vector network analyzer. Electromagnetic parameters like dielectric constant, magnetic permeability and reflection, transmission and absorption losses by the sample were obtained for 1.75mm thick sheet. Results reveal the absorption loss of 65dB with reflectance loss less then 1dB and almost zero transmittance in the measured frequency range.

1. Introduction
The use of microwave absorption materials has attracted great interest due to rapid increases of electromagnetic interference (EMI) pollution by communication devices like mobile phones, local area network, radar systems etc. Electromagnetic waves cause interruption in the operation of electronically/magnetically-controlled devices. For the significant absorption of unwanted electromagnetic waves the materials is essentially required to have electric/magnetic dipoles with homogeneous distribution of particulate. For such materials, the specific shape and size distribution of particles is very important for the electromagnetic wave absorption. Particles with size less than the skin-depth (1µm for iron in the 1–20 GHz range) are the best to increase effective incidence to EM wave absorbers by suppressing the eddy current phenomenon [1-2]. Large surface to volume ratio of these conducting and magnetic materials makes them very important. Materials like carbon coated copper, α-Fe/SmO, ferrofluid-conducting polymer composite etc. has already been studied [3-5]. Recently, use of carbon-containing nanometre size magnetic materials for electromagnetic shielding and absorption have also been investigated [6–9].
Soft metallic magnets are potential materials for microwave absorption in high frequency region. In the present investigation, our main focus is to synthesize nano-magnetic CoFe2 metal alloy and to study physical properties relevance to EMI shielding in Ku band region.

2. Experimental
CoFe 2 nanoparticles were synthesized by chemical route followed by heat treatment in inert atmosphere.
Crystalline phase has been analyzed by using Bruker D-8 Advance powder X-ray diffractometer (XRD), 40KV and 40mA with Cu K radiation and scan rate of 0.02 o/sec. Coherently crystallite size (dxrd) was calculated from the width of diffraction peaks after correcting instrumental broadening. The material was analyzed by transmission electron microscope (TEM) model-JEM-200 CX for particle shape and size measurements. The magnetization measurements of the sample were done using DMS–880vibrating sample magnetometer (VSM). Conductivity measurements have been carried out using Keithley nano-voltmeter model 2182A and the current source 6221 by two probe method. Further the particles have been tested for microwave absorption by vector network analyzer (VNA) in Ku band region. The electromagnetic parameters were measured and their values are plotted in the frequency range 12.4 to 18 GHz.

3. Result and Discussion
X-ray diffraction pattern of sample as shown in Figure 1 reveals the formation of CoFe2 alloy. In order to find out the crystallite size, a slow scan with step size 0.005 o/sec. of selected diffraction peaks such as (110) & (200) has been recorded and calculated by Scherer’s formula [10]. The average crystallite size comes out to be 36nm.
Figure 1. XRD pattern of the CoFe2 nano-alloy.
In a nano phase material particle size, shape and their distribution always plays a crucial role in modeling its physical properties [11]. Figure 2 shows the electron micrograph of the sample. Micrograph shows the average particles size in the range of 20-100nm and majority of nano- alloy particles are spherical in shape. However, few individual particles seem to be made up of more then one small particles joined from the surfaces.
Figure 2. TEM image of the CoFe 2 nano-particles.
Figure 3 shows the magnetization measurements of the cobalt-iron nano alloy. From the curve it is concluded that the material is highly magnetic with saturation magnetization value of 110emu/gm, the corecivity and
the retentivity parts are nearly zero which shows a very close to superparamagnetic nature of the alloy.
Figure 3. Magnetization measurements of the CoFe2 nanoparticles.
In microwave absorption electrical conductivity as well as magnetic permeability plays crucial role in determining the skin depth for the material. Skin depth is the amount of thickness of the material, which reduces the intensity of microwaves to 1/e times when passed through it. The value of skin depth (δ) is defined as
Page 3
σ
µ
π
δ
f
1
=
where, f = frequency of microwaves, µ (magnetic permeability) = B/H is the relative increase or decrease in the resultant magnetic field inside a material compared with the magnetizing field in which the given material is located, σ = electrical conductivity of material.
Magnetically permeable and high conductivity nature of the cobalt-iron metal alloy makes it suitable for good microwave absorption. The experimental result for the VI characteristics of material is shown in Figure 4. The value of conductivity as calculated comes out to be equal to 2.5x10
2
S
1
m
-1
.
Figure 4. I-V characteristics of the material.

Figure 5. (a) Reflection and absorption loss by the material; Real and imaginary parts of (b) dielectric constant and (c) Magnetic permeability in frequency range 12.4-18 GHz.
The reflection loss R of less than −1 dB was obtained in the frequency range 12.4-18 GHz. Strong microwave absorption properties by CoFe2
nanoparticles were observed as calculated. Figure 5 shows the reflection and absorption loss of incident microwave and the values of dielectric constant and magnetic permeability of the material. An absorption loss of 65 dB was reached in the entire frequency range with an absorber thickness of 1.75 mm. The high-frequency permeability of metallic magnetic materials decrease due to the eddy current phenomenon
induced by EM wave interference [4]. These materials exhibit improved microwave absorption properties because of their proper EM matching between the dielectric loss and the magnetic loss.

4. Conclusion
Developed cobalt-iron nano-alloy having excellent electrical and magnetic properties are in good agreement for EMI shielding material. Further, physical properties like crystalline size, particle shape/size, and magnetization of CoFe2 nano metal alloy are explored relevance to microwave absorption (12.4-18 GHz) measurements. The reflection loss and transmission loss measurements indicate strong absorption properties by the material. Therefore, the developed material may find good applications in EMI shielding demand of new generation devices such as computers, cell phones, radar and other electronics gadgets working in high frequencies.

Sensei
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Mon Nov 17, 2008 7:37 am; edited 3 times in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
deisel
Member


Joined: 22 Mar 2008
Posts: 529
Location: in the sea of potential harmony

PostPosted: Fri Nov 14, 2008 2:59 pm    Post subject: Reply with quote

Wow sensei those are beautiful. Nano cat is pretty awesome too. I would love to have one of those should any become available.
Back to top
View user's profile Send private message
justageekhere
Member


Joined: 24 Sep 2007
Posts: 314

PostPosted: Fri Nov 14, 2008 3:23 pm    Post subject: Reply with quote

Super! Very Happy

Great info and beautiful works! Idea

Since pyrite is iron, as well, this lends additional positive confirmation to all of us who use it in powder in our orgonite. (YMMV)Advancing with the plasma tube is seriously cool! Directed energy beams is what the whoo ha's are using against us, and so turning it around to help is AWESOME!

Also, there is much emf shield patent information online (for those who seek it) that includes other powdered materials in these type devices.

Thank you so much, Sensei and Crew, for your continuing r/d. Sure is improving the quality of our lives in this electrosmog challenged world we find ourselves in.
_________________
Patriotism is supporting your country all the time and your government when they deserve it. --Mark Twain
Back to top
View user's profile Send private message
Aghora
Member


Joined: 12 Nov 2008
Posts: 4
Location: UK

PostPosted: Fri Nov 14, 2008 4:06 pm    Post subject: Reply with quote

Hi there! I am new to the Orgonite staff ( I received a ‘free gift’ together with a Yoga timer I bought recently- the piece of orgonite has sparked my curiosity. I teach and practise a form of esoteric yoga based on energy development. I could feel the particular flavour of the energy activated when the orgonite came in contact with my aura-easy to feel and very specific).
Very intrigued, I started my research about it and this is how I found warriormatrix. I tuned into the energies of some of the pieces of orgonite posted on the site; very impressive! The ones you posted today seem to be more powerful that all the other I’ve seen until now. The triangular piece ( where the cat is playing with) has an intense vibration on Anhata Chakra (the Heart Chakra)- the energy expands and expands… Congratulations! With your permission I will print the photo as I am surprised that I can connect with that source of energy by just using the photo. I can only imagine how the real thing must feel like.
PS. English is my second language! Thank for your patience when reading my message.
Back to top
View user's profile Send private message
GreyWeirCat
Member


Joined: 22 May 2006
Posts: 2167
Location: The Crystal Palace

PostPosted: Fri Nov 14, 2008 4:29 pm    Post subject: Reply with quote

I would bet the lower right triangle device is nano-crystallized one. They have a really nice effect. Subtle and joyful.

Mike
Back to top
View user's profile Send private message
clipper
Member


Joined: 22 Jul 2006
Posts: 300
Location: The day after tommorrow.

PostPosted: Fri Nov 14, 2008 8:01 pm    Post subject: Reply with quote

That's off the HOOK D !

What are possibilities of this materiel being made available in the future on Orgone Crystals?

Gotta try some of that.
_________________
"I've let go the catch, we are over the edge, you have left me no where to go. Riding shotgun down the avalanche."
Shawn Colvin, Live'88
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6701
Location: Here Now. Somewhere Else Later

PostPosted: Fri Nov 14, 2008 8:41 pm    Post subject: Reply with quote

Soon.

Sensei
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction All times are GMT
Goto page 1, 2, 3 ... 12, 13, 14  Next
Page 1 of 14

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum