HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
The Lourdes TBs (Radionics in Orgonite Device Construction)

 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction
View previous topic :: View next topic  
Author Message
Lesenthe
Member


Joined: 07 Aug 2009
Posts: 137
Location: Australia

PostPosted: Sun Nov 08, 2009 12:26 pm    Post subject: The Lourdes TBs (Radionics in Orgonite Device Construction) Reply with quote

This batch of TBs is actually my first using a muffin pan, so I wanted to do something special. I'd read that programming orgonite devices during the curing process increases the effectiveness of the finished piece, so I decided to take that a step further.

The crystals were placed on the output of a radionic device for a few hours prior to pouring. A witness for the grotto at Lourdes was used to gain a rate for the healing energy (and *only* the healing energy) that has caused so many reported miraculous healings over the decades. I'll reserve comment on the source of that energy, because it's really irrelevant for the purposes of the experiment. The fact that there is energy there which causes healing is the important thing. And there is. This particular radionic instrument causes energy from the witness/rate combination to be amplified and emitted at the output, rather than transmitting it to a witness sample for a target.

I must mention that the idea of using healing energy from such a location is not mine, and was described by Charles Cosimano in one of his books.

The TBs contain fine copper, which is visible on the top surface, stainless steel from scrubbing pads, and iron oxide powder, which caused the black colouration. A little selenite was added to the charged crystal in each TB.

Once poured, the TBs were left to cure beside the output of the radionic unit. My hope is that, though the crystals will eventually lose their charge, the resin itself will possess the desired "pattern" from having been in contact with it while curing. Thus, the energy passing through each TB would be altered to match the healing energy present in Lourdes.


Whether or not this occurs, I have to say that these are the most effective pieces I've made yet. The energy coming from the radionic device's output doesn't feel anywhere near as dramatic as that emanating from these TBs. My pieces usually feel nice enough, but these actually make me feel happy. I can't wait to use these in healing. I'm unsure whether I'll place these around my house, or even try my hand at gifting, which something I've yet to do. Imagine that kind of healing energy being broadcast by a tower.

In any case, I recommend this experiment to anybody with the resources to build a radionic unit (it took me about twenty minutes and cost less than ten dollars in parts). I intend to make a curing table with the device built into it, so I don't have to try to balance bits and pieces in my garage so that the device is pointing the right way.

I'm awaiting permission from the author who invented the radionic device described, before putting out its exact specs.
Back to top
View user's profile Send private message
Lesenthe
Member


Joined: 07 Aug 2009
Posts: 137
Location: Australia

PostPosted: Sun Nov 08, 2009 7:08 pm    Post subject: Reply with quote

The author was kind enough to allow me to post his device specs, so I'll be posting that tonight.
Back to top
View user's profile Send private message
Lesenthe
Member


Joined: 07 Aug 2009
Posts: 137
Location: Australia

PostPosted: Mon Nov 09, 2009 10:39 am    Post subject: Reply with quote

Huh, I'd have thought there'd be more interest in something like this. Maybe this will spark some interest. Smile

The radionic device used is called a Starblaster, and was invented by Charles Cosimano. Like most of his devices, it's extremely simple and inexpensive to build. It's based around an amplification pattern.

All that's necessary is to print out the pattern in around A4 size, and stick it to the lid of a cardboard box. A shoebox is fine, or a gift box will do. Cut a circle of aluminium foil to the size of the circle in the centre (the largest of the two central circles) and glue it over the top. Make a hole in the centre of the foil, large enough to accommodate a small bolt.

Wire three potentiometers together in series, and attach enough wire at each end to reach the centre of the pattern. Punch holes in the box lid and install the pots beneath the amp pattern. Attach the wires at each end of the pots to the bolt at the centre of the foil circle.

Install two monaural jacks, one on either side of the pots. Wire one terminal of each to the centre of the pattern. Screw the nut onto the bolt to hold the wires in place. Attach a plug to an alligator clip, and plug that into the left jack. Attach the clip to a metal plate. This is the witness plate.

That's it. Simple. Makes very little sense. Please feel free to tell me that this makes no sense, and that it shouldn't work. When you're done doing that, spend the fifteen minutes it takes to put this thing together, and give it a shot. Patterns on paper should not have an effect upon energy, but they do. Place a witness on the plate, tune the dials, and the resulting energy comes hurtling from the centre of the pattern. Place something on or in front of the pattern, and it becomes charged.

In this case, I used a picture of the grotto at Lourdes, as described. I was hoping for an outside confirmation of this before my having to mention it, as I prefer to work blind myself. The energy coming from the TBs is healing energy, but there is a discordant note. The intent was to tune the starblaster to the healing energy present in the grotto, but I didn't tune out the empathic tone of the place, which seems to be sadness and poverty. While I may use the TBs for healing work, I certainly can't place them around my home with any degree of permanence. I'm left with a few options.

I can either store them securely in a shielded box, or I can take them to a remote location, away from human habitation, and turn it into a place of healing. Does anyone have any other suggestions?
Back to top
View user's profile Send private message
Lesenthe
Member


Joined: 07 Aug 2009
Posts: 137
Location: Australia

PostPosted: Sat Nov 21, 2009 10:35 am    Post subject: Reply with quote

Really not understanding the complete lack of interest here, but since I'm still experimenting, I'll keep posting. Is using radionics in charging orgonite a passe topic?

The pair of TBs pictured below contain the current standard mix for my items; iron oxide powder, stainless steel and fine copper near the surface. I took the time to pour in layers, and this really made a difference in terms of how cleanly they turned out. Aesthetics aside, though, the crystals were charged radionically prior to the pour, and the TBs were charged in the same way while curing.

This time, instead of relying on an external source of energy, I used the rate for the healing energy I use when doing healing work myself. The difference between these pieces and the Lourdes TBs is pretty dramatic to me, for obvious reasons.

The best advice I can give is to be careful what you're charging with. The more specific the device, the less specific you need to be with your focus. This device is simply an amplifying pattern with dials. You need to be pretty specific in your focus when using something as simple as this. I'm intimately familiar with my own energy, of course, but I'd never experienced the energy in Lourdes, and therefore wasn't aware that I needed to filter out the empathic noise from the area.

That empathic noise, by the way, seems to have faded from the TBs since I originally poured them. I have no explanation for this thus far. The energy emanating from the TBs is still patterned for healing, so the TBs haven't lost their programming. As far as I understand it, it shouldn't be possible for them to lose this anyway, as it was programmed during the curing process, and will remain a part of the hardened resin.
Back to top
View user's profile Send private message
Cosmic Sage
Member


Joined: 30 Aug 2009
Posts: 369
Location: Fernandina Beach , FL. U.S.A

PostPosted: Sat Nov 21, 2009 7:24 pm    Post subject: Reply with quote

This is quite interesting to me man albeit a little confusing. I understand the principals of radionics just the wordage is confusing me. What are potentiometers and monaural jacks? Could you possibly take a few pictures of your finished device and components? I have set healing intentions and have played healing frequencies while pouring and curing pieces.The pieces definately seemed to have a nicer feel to them than some of my early pieces. Man I gotta get some iron oxide those TB's look great!
_________________
Wisdom Begins In Wonder
Back to top
View user's profile Send private message
Lesenthe
Member


Joined: 07 Aug 2009
Posts: 137
Location: Australia

PostPosted: Sat Nov 21, 2009 9:14 pm    Post subject: Reply with quote

Oops. Sure, I can do that.

A potentiometer is a component you can find at any electronics store. I think they're usually used as volume control knobs. A monaural jack is an audio jack, the kind you plug headphones into. Monaural just means "mono" as opposed to "stereo".

Basic outline of the machine:

Both of these images are taken from the book, and are used with the kind permission of the author.

And I agree, the oxide powder really makes 'em look attractive. Painting the resin onto an existing piece makes for a nice gloss finish, too, whereas cast pieces usually come out matte.
Back to top
View user's profile Send private message
meta
Member


Joined: 13 Nov 2007
Posts: 27
Location: Slovenia

PostPosted: Thu Nov 26, 2009 12:29 pm    Post subject: Reply with quote

Hi,
You are wrong that nobady is interested in the topic...I am Smile! And I have a question as obviously you tried thing or two...You said:
"Attach a plug to an alligator clip, and plug that into the left jack. Attach the clip to a metal plate. This is the witness plate. " But where is "taping plate" for ajustment of potentiometers? This tipe of device is a little misterious and I have many questions but no answers. Help!

Meta
_________________
As we understand the doctors, you can live much longer if you quit everything that makes you want to
Back to top
View user's profile Send private message
Lesenthe
Member


Joined: 07 Aug 2009
Posts: 137
Location: Australia

PostPosted: Fri Nov 27, 2009 9:10 am    Post subject: Reply with quote

In my experience, a radionic device doesn't need a stick-pad in order to be effective. The stick is a means for the practitioner's subconscious to alert them to the fact that specific conditions have been met. I never could get a stick on any device, no matter what I did. I used a pendulum for awhile, with limited success, before going with my instinct and doing what I do with everything else: going by feel. I believe that the machine should suit the practitioner's particular style, rather thsn the other way around. Apologies for forgetting to include the stick-pad instructions, though.

Should you prefer to use one, you have a few options. Any metal surface with a smooth, non-metal layer on top will do. Usually it's plastic, but you can use virtually anything within reason. The original instructions for the starblaster suggested a coil of unshielded copper wire stuck to the underside of a plastic coffee can lid. The ends of the coil should be connected to a plug by way of a suitable length of speaker wire, and plugged into the device's right-hand jack. This works just fine.

Other uses for a radionic device include attaching a pair of alligator clips to a length of speaker wire and plugging this into the right-hand jack, this being the output side. The clips could be attached to a metal mould, providing the mould is conductive and doesn't have a non-stick coating. The clips could be attached to the wires of a PW or other powered device while it cures, also.

I only wish that I'd thought of this before I made my basic toolset. Live and learn, of course. My latest pour was a set of TBs which cured to the rate for unconditional love. They turned out so much more pleasant than my previous endeavours that I gridded my home with them. It came as a big surprise to me that spreading them out increased their effectiveness. I sensed it from a distance of several blocks on my way home yesterday.

So far, unconditional love is the best intent I've charged my orgonite with so far, which ties in with what everybody else has been saying. This shouldn't be too surprising, as I've been using the same intent when healing for years. It carries everything one may need. For the Dyer fans out there, it matches seamlessly with his "Seven Faces of Intention".

The starblaster, while useful, wan't purpose-built for charging orgonite. I intend to come up with a device to do just that, and will post the specs in this thread when complete. Chances are it will be very similar to the starblaster in any case, as the amp pattern is definitely a useful way of shooting patterned energy directly out, rather than relying on a witness sample.

Any suggestions would be welcome, of course. Smile
Back to top
View user's profile Send private message
meta
Member


Joined: 13 Nov 2007
Posts: 27
Location: Slovenia

PostPosted: Fri Nov 27, 2009 10:44 am    Post subject: Reply with quote

Thanks for kind explanation!

Few things immediately crossed my mind in the "what-if" or "I-am-going-to-try" fashion: I will put orgonite pyramid under the center of big central circle (glued in the box) with PW middle crystal way (with winding wire) and zapper to feed the output radiating. Is it worth to try? What do you think? I made a little different device with magnets in little circles around the big one. I did not tried it yet as I am afraid that it will not work (irrational...I know). As I read somewhere in weiring is a rule that thicker is wire, the less resistance it has which is good in this case as we are dealing with subtle energies. I put very thin wire ( insulated with lack...for transformers).
Your suggestions or comments?

Meta
_________________
As we understand the doctors, you can live much longer if you quit everything that makes you want to
Back to top
View user's profile Send private message
Lesenthe
Member


Joined: 07 Aug 2009
Posts: 137
Location: Australia

PostPosted: Fri Nov 27, 2009 7:53 pm    Post subject: Reply with quote

I know that feeling. My advice is to ignore it, stop seeking outside confirmation, and just try it. I know that at first it feels safer to have somebody else tell you how it should work, but it's an amazing feeling when you just bite the bullet, try it for yourself, and find that it works.

Let us know how it goes?
Back to top
View user's profile Send private message
dineen
Member


Joined: 05 Apr 2017
Posts: 2
Location: usa

PostPosted: Sun Apr 09, 2017 6:44 pm    Post subject: Reply with quote

The stuff Charles Cosimano puts out is probably worthless. Look at the comments on this amazon books page for the overpriced books he sells. In my opinion, he is just a con artist. He is very poor and sick himself (diabetes, heart problems) so his stuff can't work, otherwise he would help himself. Look up the short article on him on the website "mystery history tv" the article titled "Charles Cosimano or evil uncle chuckie claims to control minds with his flashlight powers." There is a lot of bad things about this guy.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum