HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
Possible Power Wand

 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Questions and Answers
View previous topic :: View next topic  
Author Message
dorothyroeder
Member


Joined: 17 Mar 2016
Posts: 98
Location: Phoenix, AZ

PostPosted: Fri Jun 24, 2016 10:42 pm    Post subject: Possible Power Wand Reply with quote

I am thinking about making this into a power wand.
Can I replace the battery connection with a plug receptor for a 15 v generator, shorten the wires to the aligator clips which would not be needed as I would solder the wires from the mobius to them, and put the whole mess into the resin? Then all the wires would be protected and the transformer would plug into the wand itself.



Oh, this is the $10 zapper unit.
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6687
Location: Here Now. Somewhere Else Later

PostPosted: Sat Jun 25, 2016 4:31 am    Post subject: Reply with quote

Interesting project, I like the direction that you are headed. The chip in that zapper is running at 9 volts and is rated up to 12 volts. !5 might blow the frequency generator. See if you can get the transformer's output down. I run 110 volts down to 9volts and I have devices that are still running 24/7 after 3 years.

If you solder wires make sure to protect them with shrink tube. You do not want open solder connections to short out from the metal in the orgonite.

What are you planning to use for a mold ?
What are you planning to use for a release agent ?
What size shrink tube on the solder connections ?
Will the tip of the crystal extend from the resin. be submerged ?
Will the crystal be orientated horizontally or vertically ?
Will the coil be partly exposed or will it be fully covered with orgonite?
What will you use for an on off switch ?
What will you do when the battery snap (connector) breaks. ? Be aware that the is the cheapest battery snap available and will quickly become unserviceable.

I encourage you to follow this to completion and am sure that you can do it !

Please post the development of your unit. Take lots of pictures so that many on the board can learn from your experience. Mistakes are fine, I don't much trust people who never make them (and have even less trust for those that will not learn from them).

Go right down the list, decide and you will not have to make quick decisions while the resin is starting to gel.

Sєηѕєι

* Drop me A PM and I will send you a heavy duty battery snap.
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Sat Jun 25, 2016 6:29 am; edited 2 times in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
dorothyroeder
Member


Joined: 17 Mar 2016
Posts: 98
Location: Phoenix, AZ

PostPosted: Sat Jun 25, 2016 5:04 am    Post subject: Reply with quote

I was getting rid of the battery snap and substituting the jack for the converter. It would be set in the top of the pour so it would be completely supported by the resin.

Good thought on the shrink tubes. Didn't think of shorts.
I was going to stand it up and cover with orgonite to just cover the wrap. I thought that was the way they are usually done.

Don't have a mold. I thought I would use a glass about 4" diameter, 4-5 " tall. If it doesn't come out of the glass I could just leave it in. . . . until I drop it and break the glass, in which the glass would hopefully come off. Then I could wrap it in leather or something. I usually use silicone spray.

Off-on switch? Pull the plug.

Will it hurt whatever is in that little plastic cover to be immersed in resin?

Do I really need the zapper unit? If the mobius coil cancels out the electrical waves, what difference does it make if they are round or square. Does the zapper make it better than just connecting to the converter directly?

Thanks for your thoughts. Making a list is an excellent idea. Something I usually skip and get in trouble.
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6687
Location: Here Now. Somewhere Else Later

PostPosted: Sat Jun 25, 2016 6:49 am    Post subject: Reply with quote

dorothyroeder wrote:

Will it hurt whatever is in that little plastic cover to be immersed in resin?

***I would coat it throughly with silicone rubber just to be sure

Do I really need the zapper unit? If the mobius coil cancels out the electrical waves, what difference does it make if they are round or square. Does the zapper make it better than just connecting to the converter directly?

***Works much better with a pulsing, clean, frequency generator.


Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
dorothyroeder
Member


Joined: 17 Mar 2016
Posts: 98
Location: Phoenix, AZ

PostPosted: Sat Jun 25, 2016 2:27 pm    Post subject: Reply with quote

[Will it hurt whatever is in that little plastic cover to be immersed in resin?

***I would coat it throughly with silicone rubber just to be sure ]

How about dipping it in Tool Magic. That uses xylene to thin it. That I have.
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6687
Location: Here Now. Somewhere Else Later

PostPosted: Sat Jun 25, 2016 4:04 pm    Post subject: Reply with quote

dorothyroeder wrote:
[Will it hurt whatever is in that little plastic cover to be immersed in resin?

***I would coat it throughly with silicone rubber just to be sure ]

How about dipping it in Tool Magic. That uses xylene to thin it. That I have.


Unknown.

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Questions and Answers All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum