HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
first induction/biggest piece yet

 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction
View previous topic :: View next topic  
Author Message
dannyP
Member


Joined: 29 Sep 2009
Posts: 229
Location: tampa florida

PostPosted: Sun Sep 19, 2010 3:34 pm    Post subject: first induction/biggest piece yet Reply with quote

Finally I had my inspiration back. I don't know about anyone else but I've been on a roller coaster but when I got off I ended up in a bigger house for less money and a hot tub for my back. Good changes for sure. The yards gotten tbs burried and the ponds in the neighborhood are gifted but I wanted a big anchor piece so here we go.

There are six st singing quartz six singing quartz shards with broken points and three dt singing quartz crystals. Three pink kunzite pieces three rainbow florite chunks. The little baggie is peridot chunks. three gemmy kyanite pieces and three selenite pieces.three tigers eye and three black kyanite. Three Apache tears and three black tourmaline pieces. They all spent a few days on my mandala plate then in the ohm box with himalayan salt to clear them and help bring them together for the job.


After cutting titanium for the base I wrapped my copper pipe with clear rubber tape except an inch or so that was left bare for the metal only layer. The tip got a splash of clear then pyrite and hematite. Some Bbs and copper chunks. In resin I mixed brass key shavings iron powder and copper powder and gold pearlex. I put some brass turnings in and poured my metal resin layer.
Then clear but the metal layer wasn't dry enough so I got a cool cloudy sparkly section and I think its enough clear to not interfere with the induction. There's aluminum then brass then steel then titanium .





What do you'll think. Also id like to keep it inside but if it'll be better outside I can find it a good home with plants. I don't know what would be best.
_________________
"Beauty is eternity looking at itself in a mirror. But YOU are eternity and YOU are the mirror."
Back to top
View user's profile Send private message
GreyWeirCat
Member


Joined: 22 May 2006
Posts: 2167
Location: The Crystal Palace

PostPosted: Sun Sep 19, 2010 7:08 pm    Post subject: Reply with quote

I wish I had just half of that creativity.

I like the way the pipe shows, where did you get that mold?

Mike
Back to top
View user's profile Send private message
dannyP
Member


Joined: 29 Sep 2009
Posts: 229
Location: tampa florida

PostPosted: Sun Sep 19, 2010 7:21 pm    Post subject: Reply with quote

It was a vase I got. For five buks at the thrift store but unfortunatly it had two dimples in the tip that dipped into the clear section and were just enough to hold the piece in. I had a choice of break the tip off the piece or break the mold. So out came the rock pick hammer. Oh.well. I used clear rubber tape I got at a gunshow so you could see. I like visibility of ingredients. Glad u liked it I haven't stopped looking at it all day.
_________________
"Beauty is eternity looking at itself in a mirror. But YOU are eternity and YOU are the mirror."
Back to top
View user's profile Send private message
Leo
Member


Joined: 03 Nov 2009
Posts: 741

PostPosted: Sun Sep 19, 2010 11:08 pm    Post subject: Reply with quote

very nice!

interesting & beautiful idea.

Very Happy
_________________
Together we have PORtential!
Back to top
View user's profile Send private message
deisel
Member


Joined: 22 Mar 2008
Posts: 529
Location: in the sea of potential harmony

PostPosted: Sun Sep 19, 2010 11:11 pm    Post subject: Reply with quote

Pretty awesome Smile
Back to top
View user's profile Send private message
Johnnyusa
Member


Joined: 02 May 2016
Posts: 138
Location: Texas

PostPosted: Tue Mar 07, 2017 11:12 pm    Post subject: Reply with quote

I never knew until I read your post n slept on it now I'm looking 4 smthng to read on my tablet n this is still open so may I comment?

I never knew until I read your post it clicked that the hollow part of the copper pipe in a cb sets up some magnetic induction precisely like an induction wire at a perpendicular angle to the alternating current electric field created by the crystals. Huh.

Wearing a gold, silver, copper, or tin necklace, ring, bracelet, or crown composed of the proper metals actually in contact with the skin similarly sets up magnetic fields like an induction coil, as Lahovsky proved by using copper wire to heal sick plants. Of course there is a torsion field created by every shape & composition- I suspect to be true.

Gold, silver, & copper are actually are repulsed by and resist magnetic fields- it impossible to magnetize gold or silver unless you actually wrap a 24k gold or silver bar with a current-carrying induction coil, & even then the moment the current stops the gold & silver will revert to normal.

It is an odd irony that if copper did not resist a magnetic field like gold & silver, then copper wire would be not work for induction coils and resonating circuits; if copper did not resist a magnetic field it could not be used for inductance to create the very magnetic fields it resists. Think on that for a min, it's a REAL mindbender if u can wrap ur head around THAT concept. Wearing a copper necklace is very much like wearing a gold or silver necklace. But what's the difference between copper & tin n why is the latter used to coat superconducting magnets? What's different about wearing a 99.9% pure tin necklace instead of a pure copper necklace as relates to the magnetic field created by the ring over your neck?

From now on I only use AL for people who want free orgonite. AL orgonite is better than nothing but I don't want it for myself anymore. Nor do I want an excess of lead, iron, or steel, but too much copper is not balanced either- every metal in resonance w/ crystals imparts a different vibe. I am starting to get into the ancient alchemical concepts of the 7 healing metals. No way to create such a product for free, it could only be created for sale on a per ounce/gram basis, like soap. Ask people when they ask for orgonite- Do you want to use the 7 healing metals, or AL, & would u care for gold or silver-plated copper pipes?

Gold or silver-plated copper pipes bc I think the crystal's capacitance is def seeking to escape from inside the cb into your home's environment thru the path of least resistance which is obviously the copper pipes, right, hmmm?

I am coming to see orgonite energy as indeed very powerful & it IS possible to have too much in your house, in your room, or under your bed. Too much maybe COULD cause cancer esp if juiced up w/ properly grounded induction. So perhaps quality is better than quantity? If you can only have say two lbs of orgonite around safely, then don't you want that orgonite to be composed of the very best metals & crystals? Is it really absurd to spend $1000 on a shiny 1-ounce 24k gold coin & $96 on a 5 ounce bar of 99.9% pure silver to be all grinded down right in front of your eyes never turning their back alter for sleight-of-hand at the same time your local metal or silversmith puts the gold or silver plating on your copper pipes? A silversmith quoted me $90 to 24k gold-plate a 3 inch copper pipe of 1/2 inch diameter, which isn't enough pipe to sink into a cb, but silver-plating is 1/50th the price (thanks JP morgan). On my next indoor cb, I only want two pipes spaced equally as far opposite teach other on the matrix to create a proper anode & cathode, of which I want one silver plated & one gold plated. I consider it to be absolutely worth the money.


It's an outdoor cb right? Why not drop a grip of neo mags down 'dem pipes to juice up that induction w/ some powerful magnetic fields?

God I need to get my grubby paws on a spectrum analyzer rentable for $550/month to find out exactly what kind of rf is coming out of those pipes. Prob just wrapping an insulated copper wire, like 10 gauge house wire, around the cb a few times would create a magnetic field, counterclockwise wraps push magnetic force up, so it would create a more powerful magnetic field each time you encircle the cb to hopefully keep all the electrical field ( and orgone) inside the grid blasting straight up.

Hey. Awesome post. U learn smthng new everyday on WM.


Last edited by Johnnyusa on Fri Mar 10, 2017 2:30 pm; edited 11 times in total
Back to top
View user's profile Send private message
masine
Member


Joined: 07 Apr 2010
Posts: 1162
Location: infinite now

PostPosted: Wed Mar 08, 2017 10:49 pm    Post subject: Reply with quote

Cool it feels good but a bit "over-packed" with energies to my taste..
maybe try less gems more quartz & metal next time =)
good job m8!
Cool
_________________
i am you
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Orgonite Device Construction All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum