HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
i need advice on my 1st pour please .

 
Post new topicReply to topic
   Warrior Matrix Forum Index -> Questions and Answers
View previous topic :: View next topic  
Author Message
hevicorn
Member


Joined: 03 Sep 2017
Posts: 4

PostPosted: Mon Sep 11, 2017 10:47 am    Post subject: i need advice on my 1st pour please . Reply with quote

hello . im a new member although iv read quite alot on here . and i thought i had done enough research to start making but now im not sure. il try to post some pictures and id be so gratefull for any advice

1st up id read in alot of places that steel scourers were suitable for tower busters so i cut them up as small as i could and measeured half and half of the cut up scourer to resin mix but now im worried it cant be a true 50 50 as the scourer is in curls therefore most of what i measured would be air :s

also i had to use more resin on the bottoms to try to make sure all the metal was covered so i have a cm or so of pure resin at the bottom .will this affect the ratio negatively ?

should i sand it all down so there is less .?is it also bad if i have metal protruding from the bottom . should i cut and sand this to flat and recoat ?

i also have little air bubble holes on some . would this mean the energy escaping etc . should i fill these in . im really not worried about what they look like i just want to make sure they are functioning right .
if anyone is energy sensitive to objects through photos id love your opinion on weather they are giving of a good energy or not i did everything i could to cleanse everything before starting and i was really trying to chanel love in to them during the process but im not sensitive in that way so i cant be sure it worked .

a day after i made them i felt so sick and headachy and unable to focus on anything wich seemed to subside when i went out for the day . that feeling dident last past that day though . iv had one by my bed the last couple of nights and iv had unsettling dreams and broken sleep .i made them just over a week ago .

im really interested to know how people get rid of or reuse any orgonite that they feel has a bad energy . can you simply add them to a new peice or do they have to be broken up . ?

anyway heres the photos . they all have a chip of clear quartz rose quartz and black tourmaline in them . thank you . Smile

heres the album hope it works not sure how you get them to show up as pictures not links
https://www.flickr.com/photos/143589653@N06/sets/72157686033128980/
Back to top
View user's profile Send private message
(Diogenes)
Member


Joined: 17 May 2017
Posts: 64
Location: DAYTON OHIO

PostPosted: Mon Sep 11, 2017 12:08 pm    Post subject: Relax Reply with quote

Relax. It is not an exact science. As long as you have some good quartz crystals and plenty of metal, things should be cool. They look fine to me. I have used steel scourers before and chopped them up in a blender, however, I prefer using metal shavings purchased form Orgone Crystals or copper bbs. It takes a few days of to get used to sleeping with them in your bedroom. Some find it hard to sleep due to energy output. The headache could have been due to resin fumes, or completely unrelated.
Back to top
View user's profile Send private message
nathangjedi
Member


Joined: 09 Sep 2016
Posts: 46

PostPosted: Mon Sep 11, 2017 6:34 pm    Post subject: Reply with quote

This looked freaking horrible. The energy is actually quite good. A bit less of the high magick factor than the one I got from orgonecrystals, or some I have made since, but there's just as much actual energy there, and it seems to have a very positive very healing effect. Not that it's good if you're selling them for money, but for gifting, EMF clearing, manifestation, healing... looks matter not!

Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6687
Location: Here Now. Somewhere Else Later

PostPosted: Mon Sep 11, 2017 6:40 pm    Post subject: Reply with quote

Here.

received_10154729126861174 by Russ Mace, on Flickr

received_10154729126916174 by Russ Mace, on Flickr

received_10154729126981174 by Russ Mace, on Flickr

received_10154729127136174 by Russ Mace, on Flickr

received_10154729127871174 by Russ Mace, on Flickr

received_10154729128411174 by Russ Mace, on Flickr

received_10154729128891174 by Russ Mace, on Flickr

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
hevicorn
Member


Joined: 03 Sep 2017
Posts: 4

PostPosted: Mon Sep 11, 2017 6:52 pm    Post subject: Reply with quote

thank you everyone . thanks for doing that sensei Smile
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6687
Location: Here Now. Somewhere Else Later

PostPosted: Mon Sep 11, 2017 7:18 pm    Post subject: Reply with quote

EVERYONE here started knowing very little about pouring and making orgonite. We have all learned from our mistakes and are happy to share our experiences...good, bad and butt ugly.

This may turn into a very interesting thread, helpful to new orgonite makers.

Welcome to WarriorMatrix.

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
RenegadeSystemsBuster
Member


Joined: 19 Aug 2017
Posts: 49
Location: Puerto Rico

PostPosted: Tue Sep 12, 2017 4:41 am    Post subject: Reply with quote

I suggest that you always pour and let your resin cure in a well ventilated area. I also got headaches during my first pour and being very sensitive to chemicals I concluded it was from breathing in fumes from the resin. Even after the resin is hardened it may still produce a small amount of fumes until a few days have passed.

- Pour in layers, let it cure and pour another layer. (especially for larger pieces)

- Try different types and brand names of Resin. Bondo is a brand name that comes ready to pour, no hardener/catalyst needed.

Here is a link to a short thread on types of Resin being used.

http://www.warriormatrix.com/about605.html&sid=dd58bfc232cf8d0caa045cd 5b964c3aa

- The material of your mold may leech it's materials into your Orgonite. Experiment with different molds.
Back to top
View user's profile Send private message Visit poster's website
nathangjedi
Member


Joined: 09 Sep 2016
Posts: 46

PostPosted: Tue Sep 12, 2017 4:13 pm    Post subject: Reply with quote

Also, when I got the nano power wand from Sensei, I had 4 days of zero sleep and straight migraines. I was happy with the energy, so no way it was going off. When I made the one in the pic above, I had two days of migraines. When I made my latest one, I had a migraine whenever I was in the house with it (I acclimated after a day).

On the other hand, I had been sick non-stop all year, and haven't been sick since (knock on wood), my personal energy (as in amount of chi and ability to manipulate it) is through the roof, manifestation is way up... Sometimes a lot of energy can give your body a jolt it's not quite ready to handle, but I'm always ready for more!

Incidentally, get a pulsed scalar (or even non-scalar) coil and place it near the orgonite, and it will clear it quickly of DOR.
Back to top
View user's profile Send private message
hevicorn
Member


Joined: 03 Sep 2017
Posts: 4

PostPosted: Wed Sep 13, 2017 11:06 am    Post subject: Reply with quote

thank you everyone . i did the ice test with one and there was no change in the ice . does the orgonite have to be super powerfull to show an effect that way ?
also if the bottoms stay sticky well after theyve cured does that mean i used too much catalyst or not enough ?
thanks nathangjedi what is a pulsed scalar coil ? . Smile
Back to top
View user's profile Send private message
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6687
Location: Here Now. Somewhere Else Later

PostPosted: Wed Sep 13, 2017 4:34 pm    Post subject: Reply with quote

Metal ratio ? You would be surprised by the flexibility in the amount, depending on intended usage. For field pieces we use as much as possible without having it stick out and needing to be ground. If it is sicking out a bit, no problem, just do a quick grind so as not to cut fingers.

Air bubbles are not a problem energetically. If you wish to avoid them, warm the resin slightly and stir slower. Use less catalyst ( about 20% less, depending on resin temperature...experiment with this ) as warm resin cures quicker and with less catalyst agent.

Not energy sensitive ? Don't worry, it comes with practice and experience.

Curing resin off gasses for a day or 2. Do let it cure fully before putting it indoors. When you pour resin, wear a VOC mask or pour outside or in a Very well ventilated area. Styrene vapors from curing fiberglass resin can make one feel bad, so pour and cure in a ventilated area.

If your orgonite is sticky, use a little more catalyst. Iy Will cure though , with time, exposure to sunshine or dry heat in a well ventilated area.

Sleep. Orgonite emits life energy, lots of it. Your body (and energetic/etheric body) and nervous system require slow adjustment. You do not start out running 3 miles your first day training, or lifting huge amounts of weights your first time et the gym.

Do Not put orgonite in the sleeping area for 3 to 5 days. After that it should be fine but if you find that it keeps you awake, give it a few more days. After you are acclimated you may put it in the bedroom for deeper sleep and more lucid dreams.

Simply and correctly made orgonite does not have "bad energy". The only examples that I have ever run across are orgonite made with diamonds and moldavite.

This may have to do with the energies acquired by the diamond from the way it was harvested/ mined or emotional energy from it being in a wedding ring or jewelry. I do not know but this has been pretty consistent in my experience. Moldavite makes orgonite with what I perceive as uncomfortable energetic output. I have no idea as to why.

You can add a damaged , unappealing or physically damaged piece of orgonite to a larger piece being poured with great results.

A chip of quartz crystal will work, but use a whole one if you can get your hands on the right sized one. Rose quartz is not usually crystalline in structure, but amorphous in molecular configuration. It will not function as the crystal element in your orgonite but many people use it as an addition for it's warm emotional properties.

Powered orgonite devices put out a tremendous amount of Life Energy and again, your nervous system requires slow, natural adjustment to the increased flow. Otherwise it is like going from Zero to 70 MPH in one second. Just too fast.

It is easy to underestimate the orgone output from a properly made, powered orgonite device, just from it's appearance. If it keeps you awake or makes you feel energetically unbalanced, turn it off, limit your exposure or place it farther away from you.

You will acclimate fairly quickly and naturally with just a little attention to these recommendations and respect for the high output of Life Force.

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com


Last edited by Sensei on Wed Sep 13, 2017 6:56 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Sensei
Site Admin


Joined: 24 Jan 2005
Posts: 6687
Location: Here Now. Somewhere Else Later

PostPosted: Wed Sep 13, 2017 5:26 pm    Post subject: Reply with quote

hevicorn wrote:
what is a pulsed scalar coil ? . Smile


Usually referred to as a Mobius Coil. Pulsed with a frequency generator.

Knot side.
[/url]

Reverse side.
[/url]

Wrapped around a giant Amethyst.
[/url]

[/url]

Sєηѕєι
_________________
Thank you for supporting WarriorMatrix at:
http://www.OrgoneCrystals.com
and
http://www.LemurianCrystal.com
Please, share...
http://www.OrgoniteInfo.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
hevicorn
Member


Joined: 03 Sep 2017
Posts: 4

PostPosted: Thu Sep 14, 2017 7:28 am    Post subject: Reply with quote

that was so helpfull thank you .
do you have any tips on making orgonite that will show somthin in the ice test ?
wow that coil looks interesting il have to do some research on that thank you
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> Questions and Answers All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum