HOME

SHOP ORGONE CRYSTALS

528Hz

Vote For Warrior Matrix at Conspiracy Top Sites

daily quote warrior matrix

Follow Us On Facebook
Templates

 
Post new topicReply to topic
   Warrior Matrix Forum Index -> How To Make Orgonite - Video Tutorials
View previous topic :: View next topic  
Author Message
HaggisYann
Member


Joined: 22 Mar 2007
Posts: 1252
Location: Loch Ness

PostPosted: Sun Sep 02, 2007 1:07 pm    Post subject: Templates Reply with quote

Lena had the idea that it would be useful to have some templates that could be printed out for various things relating to orgonite making, so I thought this would be a good place to put the thread.
I will put up various templates when I am able to produce them.
Any suggestions are welcome, though I can't guarantee how well they will turn out or how useful.
The first one is a pyramid side based on the golden mean (Phi ratio), with other smaller ones whose sizes relate to each other, also according to Phi. If you can get the pyramid moulds from Sensei when they are available, it would be alot easier for many of us who lack the tools to make a rigid enough form, but I think this might be useful nevertheless for those who wish to scale something to a custom size or experiment. These can be printed on a standard A4 or Letter size sheet.
I will eventually be adding cones based on Phi, and some templates for the wood parts of a cloudbuster (again, Lenas idea Smile ) which I may need a bit of help getting right.
Anyway, here's the first shape:



namaste
Yann
Back to top
View user's profile Send private message
Lena
Moderator


Joined: 24 Jan 2005
Posts: 2833
Location: on the right after the big tree

PostPosted: Sun Sep 02, 2007 1:22 pm    Post subject: Reply with quote

Hot damn Yann,

I had just started thinking about it, mentioned it to you - and there it is...

I had asked Yann to maybe come up with some designs for some of us who are geometrically challenged Smile and that was like a day ago...

I haven't caught up on my thoughts yet - I need more time but this is amazing... and a great place to start.

So grateful... now I'll be wasting much less paper drawing the wrong kind of lines...

Lena
_________________
Change happens when we become aware of what we are already doing.

www.LenaRocks.com
Back to top
View user's profile Send private message Send e-mail
HaggisYann
Member


Joined: 22 Mar 2007
Posts: 1252
Location: Loch Ness

PostPosted: Sun Sep 02, 2007 1:53 pm    Post subject: Reply with quote

lol, yw Very Happy

namaste,
Yann
Back to top
View user's profile Send private message
HaggisYann
Member


Joined: 22 Mar 2007
Posts: 1252
Location: Loch Ness

PostPosted: Sun Sep 02, 2007 4:48 pm    Post subject: Reply with quote













If anyone notices an error, please say! lol.
Back to top
View user's profile Send private message
HaggisYann
Member


Joined: 22 Mar 2007
Posts: 1252
Location: Loch Ness

PostPosted: Tue Sep 04, 2007 5:28 pm    Post subject: Reply with quote

Hope all the info on this is correct.....
If anything needs altering it willl be easy enough. Please say if I missed something.


Last edited by HaggisYann on Tue Sep 04, 2007 9:56 pm; edited 1 time in total
Back to top
View user's profile Send private message
GreyWeirCat
Member


Joined: 22 May 2006
Posts: 2167
Location: The Crystal Palace

PostPosted: Tue Sep 04, 2007 5:41 pm    Post subject: Reply with quote

What a great job!

Mike
Back to top
View user's profile Send private message
HaggisYann
Member


Joined: 22 Mar 2007
Posts: 1252
Location: Loch Ness

PostPosted: Tue Sep 04, 2007 5:50 pm    Post subject: Reply with quote

Thanks mike Smile

namaste
Julian
Back to top
View user's profile Send private message
HighSea
Member


Joined: 08 Jul 2008
Posts: 82

PostPosted: Thu Jul 24, 2008 5:03 pm    Post subject: Reply with quote

Thank you, these are VERY useful. I did notice one thing that should be adjusted...

The green measurement shows 9" and 8" radius when they are the diameter of the spacers. Halve this for the radius. I would edit the 9" to 4.5" and the 8" to 4" next to the green arrows. The measurement to the center of the holes would need to be halved as well so 5" is 2.5" for example.

Update: One thing I noticed is that after printing the diagrams they were not to scale. Is it possible to get them to print to scale in the printer settings?

I found that the middle spacer wasn't required...I used the top spacer to hold the short copper tubes in place until the resin hardened around the bottom spacer. Just look directly down (vertical) onto the device and you can see the outside edge of the spacer line up with the sides of the pail. Look from the sides (horizontal) to see the pipes lined up straight, not twisted. Removed the spacer to add more metal, crystals and resin and replaced it during curing. Eventually the pail fills up and you don't need the spacer at all.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topicReply to topic
   Warrior Matrix Forum Index -> How To Make Orgonite - Video Tutorials All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum